EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Aging-Induced Changes in Optical Behavior and Surface Morphology of Additively and Subtractively Manufactured Dental Materials

Georgiana Osiceanu iD, Roxana Diana Vasiliu, Flavia Roxana Bejan iD, Mihaela Ionela Gherban iD, Liliana Porojan iD

Dentistry Journal · 03.04.2026 · 14 (4) · 210

DOI: 10.3390/dj14040210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 03.04.2026. Verfasst von Georgiana Osiceanu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Doctoral School Faculty of…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: Modern dentistry focuses on the ongoing development of digital alternative technologies and the study of the properties of these innovative materials is deemed essential. Therefore, the objectives of this study were to evaluate the optical and surface characteristics of six computer-aided design/Computer-Aided Manufacturing (CAD-CAM) dental materials, both subtractive and additive, in relation to in vitro degradation.

Methods

CAD-CAM dental materials, subtractively processed (Vita Enamic, Cerasmart, Brilliant and Tetric) and additively manufactured (Saremco Crowntec and Voco C&B), were prepared to standard dimensions of 14 × 10 × 1 mm, with baseline measurements taken prior to, and after, the degradation procedures, consisting of immersion in an ADA-recommended staining broth, artificial aging (thermocycling), and the combined effects of staining and in vitro aging. Additionally, two different surface treatments were investigated (polished and glazed).

Results

The poorest color stability was observed for Tetric glazed specimens (mean value 25.585) subjected to staining, while the best performance was recorded for Brilliant polished Control (average value of 0.781). The staining procedure produced the most pronounced color changes. Surface treatment did not significantly affect color stability, and surface roughness was not influenced by either the degradation method or the surface treatment (p > 0.05). Atomic Force Microscopy (AFM) evaluation revealed superior performance of the glazed surfaces, characterized by lower nanoroughness values compared with polished surfaces and a smoother surface appearance.

Conclusions

The staining potential of staining broth was demonstrated in this study, with the highest values recorded after the staining procedures. In addition, the influence of artificial aging alone and artificial aging combined with staining was investigated, providing relevant results for a better clinical approach. Moreover, surface treatment demonstrated reliability and therefore clinical applicability.

Schlagwörter

Stichwörter der Autor:innen

CAD-CAMadditive technologyglazein vitro degradationmechanical polishingsubtractive technologysurface roughnesssurface treatment

Autor:innen und Institutionen

  • Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Doctoral School Faculty of Dental Medicine, "Victor Babes" University of Medicine and Pharmacy T…
  • Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, "Victor Babes" University of Medicine and Pharmacy Timisoara, Eftimi…
  • National Institute for Research and Development in Electrochemistry and Condensed Matter, 300569 Timisoara, Romania.

ORCID-Profile: Georgiana Osiceanu, Flavia Roxana Bejan, Mihaela Ionela Gherban, Liliana Porojan

Zitieren

APA

Osiceanu, G., Vasiliu, R. D., Bejan, F. R., Gherban, M. I., & Porojan, L. (2026). Aging-Induced Changes in Optical Behavior and Surface Morphology of Additively and Subtractively Manufactured Dental Materials. Dentistry Journal, 14(4), 210. https://doi.org/10.3390/dj14040210

Vancouver

Osiceanu G, Vasiliu RD, Bejan FR, Gherban MI, Porojan L. Aging-Induced Changes in Optical Behavior and Surface Morphology of Additively and Subtractively Manufactured Dental Materials. Dentistry Journal. 2026;14(4):210. doi:10.3390/dj14040210

BibTeX
@article{Osiceanu2026,
  author = {Osiceanu, Georgiana and Vasiliu, Roxana Diana and Bejan, Flavia Roxana and Gherban, Mihaela Ionela and Porojan, Liliana},
  title = {Aging-Induced Changes in Optical Behavior and Surface Morphology of Additively and Subtractively Manufactured Dental Materials},
  journal = {Dentistry Journal},
  year = {2026},
  volume = {14},
  number = {4},
  pages = {210},
  doi = {10.3390/dj14040210}
}
Kostenlos starten →