EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Common Staining Beverages on the Color Stability of Additively and Subtractively Manufactured Provisional Materials

Alberto Ferreiroa iD, Michelle Lissette Ortiz-Soto iD, Jaime Orejas iD, Irene García-Martínez iD, Laura Godoy-Ruiz

Dentistry Journal · 12.03.2026 · 14 (3) · 164

DOI: 10.3390/dj14030164 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 12.03.2026. Verfasst von Alberto Ferreiroa und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry and Prosthodontics, Faculty of Dentistry, Complutense University of Madrid, 28040 Madrid, Spain. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: The increasing use of digital manufacturing techniques in prosthodontics has raised concerns regarding the long-term esthetic performance of provisional restorations. This in vitro study aimed to compare the color stability of provisional restorations fabricated by additive (3D-printed) and subtractive (milled) manufacturing techniques after immersion in common staining beverages.

Methods

Eighty polymethyl methacrylate (PMMA)-based specimens (16 × 1 mm) were fabricated and divided into two groups: additive (n = 40) and subtractive (n = 40). Each group was immersed in coffee, red wine, green tea, or cola for 60 and 120 h at 37 °C. Color measurements were recorded using a spectrophotometer in the CIE LCh* system, and color differences (ΔE00) were calculated using the CIEDE2000 formula. Data were analyzed using repeated-measures analysis of variance (ANOVA) and Tukey post hoc tests (α = 0.05).

Results

Additively manufactured specimens showed significantly higher color change (ΔE00) values than subtractively milled specimens across all immersion media and time intervals (p < 0.05). Red wine and coffee caused the greatest discoloration, whereas cola produced the least effect.

Conclusions

Within the limitations of this study, additive manufacturing resulted in lower color stability than subtractive fabrication. Subtractive PMMA materials exhibited superior optical behavior, suggesting their suitability for long-term provisionalization in esthetically demanding clinical situations.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcolor stabilitydental materialsspectrophotometrysubtractive manufacturingthree-dimensional printing

Autor:innen und Institutionen

  • Department of Restorative Dentistry and Prosthodontics, Faculty of Dentistry, Complutense University of Madrid, 28040 Madrid, Spain.
  • Department of Odontology, Faculty of Health Sciences, European University of Madrid, 28670 Villaviciosa de Odón, Spain.

ORCID-Profile: Alberto Ferreiroa, Michelle Lissette Ortiz-Soto, Jaime Orejas, Irene García-Martínez

Zitieren

APA

Ferreiroa, A., Ortiz-Soto, M. L., Orejas, J., García-Martínez, I., & Godoy-Ruiz, L. (2026). Effect of Common Staining Beverages on the Color Stability of Additively and Subtractively Manufactured Provisional Materials. Dentistry Journal, 14(3), 164. https://doi.org/10.3390/dj14030164

Vancouver

Ferreiroa A, Ortiz-Soto ML, Orejas J, García-Martínez I, Godoy-Ruiz L. Effect of Common Staining Beverages on the Color Stability of Additively and Subtractively Manufactured Provisional Materials. Dentistry Journal. 2026;14(3):164. doi:10.3390/dj14030164

BibTeX
@article{Ferreiroa2026,
  author = {Ferreiroa, Alberto and Ortiz-Soto, Michelle Lissette and Orejas, Jaime and García-Martínez, Irene and Godoy-Ruiz, Laura},
  title = {Effect of Common Staining Beverages on the Color Stability of Additively and Subtractively Manufactured Provisional Materials},
  journal = {Dentistry Journal},
  year = {2026},
  volume = {14},
  number = {3},
  pages = {164},
  doi = {10.3390/dj14030164}
}
Kostenlos starten →