EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation of Thermo-Mechanical Response, Tool Contact Stress, and Heat Generation Mechanisms in FSW of AISI 304 Stainless Steel Across Plunge, Dwell, and Travel Phases

Mohamed Ragab, Ashraf Bakkar, Mohamed M. El-Sayed Seleman, Sabbah Ataya, Ali S. Hammad

Crystals · 04.11.2026 · 16 (11) · 706

DOI: 10.3390/cryst16110706 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 04.11.2026. Verfasst von Mohamed Ragab und 4 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Umm Al-Qura University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Friction stir welding (FSW) is now widely acknowledged as an effective method for joining high-strength steels. Numerical simulation of FSW has become a vital tool for optimizing process parameters. In the present study, a 3-D numerical model based on the Coupled Eulerian–Lagrangian (CEL) formulation is developed to simulate the plunge, dwell, and travel phases during the FSW of 304 stainless steel under various rotational speeds, plunge rates, dwell times, and welding speeds. The model is validated using the experimental plunge force data across all three process phases, demonstrating good agreement. The numerical findings indicate that the tool rotational speed exerts a more pronounced influence on the peak temperature, plastic strain, stir zone (SZ) geometry and heat-affected zone (HAZ) profile compared to welding speed. A favorable balance between peak tool thermal levels and surface contact stress is achieved at 300 rpm and 1.25 mm/s welding speed. Furthermore, plastic deformation heat accounts for 18.8% and 43.5% of the total heat generation at 200 and 500 rpm, respectively. The developed model provides a robust baseline tool for FSW process optimization.

Förderung

  • Umm Al-Qura University

Zitieren

APA

Ragab, M., Bakkar, A., Seleman, M. M. E., Ataya, S., & Hammad, A. S. (2026). Numerical Investigation of Thermo-Mechanical Response, Tool Contact Stress, and Heat Generation Mechanisms in FSW of AISI 304 Stainless Steel Across Plunge, Dwell, and Travel Phases. Crystals, 16(11), 706. https://doi.org/10.3390/cryst16110706

Vancouver

Ragab M, Bakkar A, Seleman MME, Ataya S, Hammad AS. Numerical Investigation of Thermo-Mechanical Response, Tool Contact Stress, and Heat Generation Mechanisms in FSW of AISI 304 Stainless Steel Across Plunge, Dwell, and Travel Phases. Crystals. 2026;16(11):706. doi:10.3390/cryst16110706

BibTeX
@article{Ragab2026,
  author = {Ragab, Mohamed and Bakkar, Ashraf and Seleman, Mohamed M. El-Sayed and Ataya, Sabbah and Hammad, Ali S.},
  title = {Numerical Investigation of Thermo-Mechanical Response, Tool Contact Stress, and Heat Generation Mechanisms in FSW of AISI 304 Stainless Steel Across Plunge, Dwell, and Travel Phases},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {706},
  doi = {10.3390/cryst16110706}
}
Kostenlos starten →