EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Laser Marking Parameters on Color Generation in AISI 304 Stainless Steel

Lyubomir Lazov iD, Nikolay Angelov iD, Jurijs Dehtjars iD, Edmunds Sprudzs, Arturs Abolins, Petar Tsvyatkov

Materials · 05.02.2026 · 19 (3) · 612

DOI: 10.3390/ma19030612 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.02.2026. Verfasst von Lyubomir Lazov und 5 weiteren Autor:innen. Beteiligte Einrichtung: Rezekne Academy, Riga Technical University, LV-1658 Riga, Latvia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: RTU-PA-2024/1-0051, Electrical Potential and Cell Immobilization Capacity of Laser-Processed Titanium Alloy Surfaces, European Union Recovery and Resilience Facility project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study concerns the influence of some basic parameters (speed, raster step, scan overlap coefficient, and surface modification at different processing angles) on the process of color laser marking with a fiber laser on AISI 304 stainless steel samples. Different surface morphology was obtained for single-shot marking; double-shot marking at angles 0° and 90°; and triple-shot marking at angles 0°, 60°, and 120°. According to the created methodology, dependencies for surface roughness, resulting color, color difference, and chromatic distance from the parameters raster step and scanning speed were established. The resulting colors and color differences for different values of these parameters for the three resulting morphological surfaces were compared. Trends in color saturation changes were established for single-shot, double-shot, and triple-shot color marking, as well as for changes in technological parameters in the studied intervals.

Schlagwörter

Stichwörter der Autor:innen

AISI 304 steelcolor differencelaser markingraster steproughnessscanning overlap coefficientspeedsurface morphology

Autor:innen und Institutionen

  • Rezekne Academy, Riga Technical University, LV-1658 Riga, Latvia.
  • Department of Machine and Precision Engineering, Technical University of Gabrovo, 5300 Gabrovo, Bulgaria.

ORCID-Profile: Lyubomir Lazov, Nikolay Angelov, Jurijs Dehtjars

Förderung

  • RTU-PA-2024/1-0051
  • Electrical Potential and Cell Immobilization Capacity of Laser-Processed Titanium Alloy Surfaces
  • European Union Recovery and Resilience Facility project

Zitieren

APA

Lazov, L., Angelov, N., Dehtjars, J., Sprudzs, E., Abolins, A., & Tsvyatkov, P. (2026). Influence of Laser Marking Parameters on Color Generation in AISI 304 Stainless Steel. Materials, 19(3), 612. https://doi.org/10.3390/ma19030612

Vancouver

Lazov L, Angelov N, Dehtjars J, Sprudzs E, Abolins A, Tsvyatkov P. Influence of Laser Marking Parameters on Color Generation in AISI 304 Stainless Steel. Materials. 2026;19(3):612. doi:10.3390/ma19030612

BibTeX
@article{Lazov2026,
  author = {Lazov, Lyubomir and Angelov, Nikolay and Dehtjars, Jurijs and Sprudzs, Edmunds and Abolins, Arturs and Tsvyatkov, Petar},
  title = {Influence of Laser Marking Parameters on Color Generation in AISI 304 Stainless Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {3},
  pages = {612},
  doi = {10.3390/ma19030612}
}
Kostenlos starten →