EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Wear Behavior for Innovative Cutting Tool in Machining AISI 304 Stainless Steel

Jinxing Wu, Wenhao Hu, Yi Zhang, Yanying Wu, Changcheng Wu, Zuode Yang

Eng · 22.09.2025 · 6 (9) · 248

DOI: 10.3390/eng6090248 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eng, online erschienen am 22.09.2025. Verfasst von Jinxing Wu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guizhou Minzu University Scientific Research Fund Sponsored Project, Doctoral funding project of Guizhou Minzu University, Guizhou Provincial Science and Technology Program Projects.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AISI 304 stainless steel is widely used in the equipment manufacturing industry due to its excellent corrosion resistance. However, its high toughness and plasticity lead to severe tool wear during machining, significantly shortening the tool’s life. To mitigate tool wear, this study designed and fabricated a novel micro-groove structure on the tool’s rake face, aiming to reduce friction and thermal stress. The performance of the micro-groove tool was evaluated through cutting simulations and durability tests. Results demonstrate that this micro-groove structure effectively reduces cutting forces, suppresses tool wear, and improves chip control and heat dissipation.

Förderung

  • Guizhou Minzu University Scientific Research Fund Sponsored Project
  • Doctoral funding project of Guizhou Minzu University
  • Guizhou Provincial Science and Technology Program Projects

Zitieren

APA

Wu, J., Hu, W., Zhang, Y., Wu, Y., Wu, C., & Yang, Z. (2025). Investigation of Wear Behavior for Innovative Cutting Tool in Machining AISI 304 Stainless Steel. Eng, 6(9), 248. https://doi.org/10.3390/eng6090248

Vancouver

Wu J, Hu W, Zhang Y, Wu Y, Wu C, Yang Z. Investigation of Wear Behavior for Innovative Cutting Tool in Machining AISI 304 Stainless Steel. Eng. 2025;6(9):248. doi:10.3390/eng6090248

BibTeX
@article{Wu2025,
  author = {Wu, Jinxing and Hu, Wenhao and Zhang, Yi and Wu, Yanying and Wu, Changcheng and Yang, Zuode},
  title = {Investigation of Wear Behavior for Innovative Cutting Tool in Machining AISI 304 Stainless Steel},
  journal = {Eng},
  year = {2025},
  volume = {6},
  number = {9},
  pages = {248},
  doi = {10.3390/eng6090248}
}
Kostenlos starten →