Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings
Buildings · 23.12.2025 · 16 (1) · 53
DOI: 10.3390/buildings16010053 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 23.12.2025. Verfasst von Xiangyu Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the interlayer properties and sustainability of 3D-printed ultra-high-performance concrete (UHPC) modified with antimony tailings (ATs). The different AT ratios considered were 2.7, 5.4, 8.1, 10.8, and 13.5 wt% additions. The mechanical experiments show the optimal concentration resulting in compressive and flexural strength of 11.2% and 17.2% enhancement at 28 days, respectively. SEM analysis revealed that AT enhances the interlayer strength of 3D-printed UHPC and influences the anisotropic behavior of the matrix around steel fibers. X-CT demonstrated that increasing the AT from the compared group to 13.5% reduced the pore volume from 2.02% to 0.30%. Furthermore, an environmental impact assessment of the 10.8 wt% AT exhibited a 32.5% reduction in key indicators including abiotic depletion (ADP), acidification potential (AP), global warming potential (GWP), and ozone depletion potential (ODP). Consequently, UHPC incorporating AT offers superior environmental sustainability in the practical construction of 3D-printed concrete. This research provides practical guidance in optimizing 3D-printed UHPC engineering, further facilitating the integrated design and manufacturing of multi-layer structures.
Zitieren
APA
Wang, X., Li, B., Wu, F., Gu, K., Tan, Y., Zhou, X., He, H., & Zhang, Y. (2025). Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings. Buildings, 16(1), 53. https://doi.org/10.3390/buildings16010053
Vancouver
Wang X, Li B, Wu F, Gu K, Tan Y, Zhou X, et al. Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings. Buildings. 2025;16(1):53. doi:10.3390/buildings16010053
BibTeX
@article{Wang2025,
author = {Wang, Xiangyu and Li, Baidian and Wu, Fei and Gu, Kan and Tan, Yi and Zhou, Xiang and He, Hongyuan and Zhang, Yufa},
title = {Enhancing Interlayer Properties and Sustainability of 3D-Printed UHPC with Antimony Tailings},
journal = {Buildings},
year = {2025},
volume = {16},
number = {1},
pages = {53},
doi = {10.3390/buildings16010053}
}
EUVIMED