3D Printed UHPC Research Status
Academic Journal of Applied Sciences · 24.03.2026 · 1 (1) · 30-32
DOI: 10.54097/kaa77997 ↗Kurz gefasst
Fachartikel in der Zeitschrift Academic Journal of Applied Sciences, online erschienen am 24.03.2026. Verfasst von Lixin Gu. Die Arbeit nennt 9 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The integration of Ultra-High-Performance Concrete (UHPC) with 3D printing technology provides innovative solutions for the field of digital construction, combining ultra-high mechanical performance with design freedom. However, there is an inherent contradiction between the characteristics of UHPC—such as its low water-to-binder ratio and high fiber content—and its printability, which constitutes the core challenge in this research area. This article systematically reviews the current research status of 3D printed UHPC (3DP-UHPC), summarizing the latest achievements from the perspectives of material rheological property control, fiber reinforcement mechanisms, characteristics of mechanical anisotropy, progress in large-scale applications, and green, low-carbon development. Studies show that through nanomaterials modification, mixture proportion optimization, and printing process control, a synergistic improvement in the printability and mechanical properties of UHPC can be achieved. While the extrusion process-induced directional alignment of fibers can enhance strength in specific directions, it also exacerbates the structural anisotropy. The development of low-cement-content UHPC and geopolymer systems provides new pathways for the sustainable development of 3DP-UHPC. Existing research still faces challenges such as a lack of standardization, weak interlayer bonding, and insufficient long-term performance data. Future efforts should focus on establishing dedicated standard systems, developing intelligent process control methods, and deepening multi-scale performance research.
Zitieren
APA
Gu, L. (2026). 3D Printed UHPC Research Status. Academic Journal of Applied Sciences, 1(1), 30-32. https://doi.org/10.54097/kaa77997
Vancouver
Gu L. 3D Printed UHPC Research Status. Academic Journal of Applied Sciences. 2026;1(1):30-32. doi:10.54097/kaa77997
BibTeX
@article{Gu2026,
author = {Gu, Lixin},
title = {3D Printed UHPC Research Status},
journal = {Academic Journal of Applied Sciences},
year = {2026},
volume = {1},
number = {1},
pages = {30--32},
doi = {10.54097/kaa77997}
}
EUVIMED