Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar
Applied Sciences · 27.10.2025 · 15 (21) · 11483
DOI: 10.3390/app152111483 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.10.2025. Verfasst von Shan Gao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
As an innovative approach to advancing sustainable construction, this study explores the integration of molybdenum tailings as fine aggregate in 3D-printed mortar. The rheological and mechanical properties of the developed mixtures are systematically investigated. Environmental and economic assessments demonstrate that molybdenum tailings sand exhibits negligible global warming potential (GWP), acidification potential (AP), and cumulative energy demand (CED), completely avoiding the environmental impacts associated with natural sand extraction. Economically, full replacement with molybdenum tailings reduces material costs, as the tailings are typically provided without charge by mining enterprises. Furthermore, the template-free 3D printing technology eliminates formwork-related environmental impacts and simplifies construction processes. Experimental results indicate that mortars with cement-to-sand ratios between 1:1 and 1:2 possess favorable printability, with nozzle movement parameters significantly influencing printed dimensions. While increased molybdenum tailings content reduces mechanical strength, the cement-to-sand ratio exerts a more pronounced effect. The compressive strength of mold-printed and free-printed mortar reaches 55–75% and 35–55% of conventional mortar, respectively. Anisotropy analysis reveals minimal directional dependence in flexural strength, whereas compressive strength shows clear anisotropy, with X-direction strength measuring approximately 70% of that in the Y direction. This research provides valuable insights into the sustainable design and performance optimization of 3D-printed mortar using industrial byproducts.
Zitieren
APA
Gao, S., Li, T., Yuan, J., Nishiwaki, T., & Huang, Z. (2025). Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar. Applied Sciences, 15(21), 11483. https://doi.org/10.3390/app152111483
Vancouver
Gao S, Li T, Yuan J, Nishiwaki T, Huang Z. Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar. Applied Sciences. 2025;15(21):11483. doi:10.3390/app152111483
BibTeX
@article{Gao2025,
author = {Gao, Shan and Li, Tianyu and Yuan, Jian and Nishiwaki, Tomoya and Huang, Zhenhua},
title = {Mechanical Properties of 3D-Printed Molybdenum Tailings Mortar},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {21},
pages = {11483},
doi = {10.3390/app152111483}
}
EUVIMED