EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Long-Term Survival and Regeneration Following Transplantation of 3D-Printed Biodegradable PCL Tracheal Grafts in Large-Scale Porcine Models

Sen-Ei Shai iD, Yi-Ling Lai, Yi-Wen Hung, Chi-Wei Hsieh, Kuo-Chih Su, Chun-Hsiang Wang, Te-Hsin Chao, Yung-Tsung Chiu, Chia-Ching Wu iD, Shih-Chieh Hung iD

Bioengineering · 2024-08-14 · 11 (8) · 832

DOI: 10.3390/bioengineering11080832 ↗

At a glance

Journal article in Bioengineering, published online on 2024-08-14. Written by Sen-Ei Shai and 9 co-authors. Institution: Department of Thoracic Surgery, Taichung Veterans General Hospital, Taichung 407219, Taiwan. Cited 16 times so far (Crossref); 33 references. The full text is freely available (open access, CC BY 4.0). Funded by: the Ministry of Science and Technology, Taichung Veterans General Hospital and National Yang-Ming University, Yen Tjing Ling Medical Foundation.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Polycaprolactone (PCL) implants in large animals show great promise for tracheal transplantation. However, the longest survival time achieved to date is only about three weeks. To meet clinical application standards, it is essential to extend the survival time and ensure the complete integration and functionality of the implant. Our study investigates the use of three-dimensional (3D)-printed, biodegradable, PCL-based tracheal grafts for large-scale porcine tracheal transplantation, assessing the feasibility and early structural integrity crucial for long-term survival experiments. A biodegradable PCL tracheal graft was fabricated using a BIOX bioprinter and transplanted into large-scale porcine models. The grafts, measuring 20 × 20 × 1.5 mm, were implanted following a 2 cm circumferential resection of the porcine trachea. The experiment design was traditionally implanted in eight porcines to replace four-ring tracheal segments, only two of which survived more than three months. Data were collected on the graft construction and clinical outcomes. The 3D-printed biosynthetic grafts replicated the native organ with high fidelity. The implantations were successful, without immediate complications. At two weeks, bronchoscopy revealed significant granulation tissue around the anastomosis, which was managed with laser ablation. The presence of neocartilage, neoglands, and partial epithelialization near the anastomosis was verified in the final pathology findings. Our study demonstrates in situ regenerative tissue growth with intact cartilage following transplantation, marked by neotissue formation on the graft’s exterior. The 90-day survival milestone was achieved due to innovative surgical strategies, reinforced with strap muscle attached to the distal trachea. Further improvements in graft design and granulation tissue management are essential to optimize outcomes.

Subjects

Author keywords

3D-printed tracheal graftlarge-scale porcinelong-term survivalpolycaprolactone (PCL)

Authors and institutions

  • Department of Thoracic Surgery, Taichung Veterans General Hospital, Taichung 407219, Taiwan.
  • Department of Applied Chemistry, National Chi Nan University, Nantou 545301, Taiwan.
  • Institute of Clinical Medicine, National Yang-Ming Chiao-Tung University, Taipei 112304, Taiwan.
  • Animal Radiation Therapy Research Center, Central Taiwan University of Science and Technology, Taichung 406053, Taiwan.
  • Terry Fox Cancer Research Laboratory, Translational Medicine Research Center, China Medical University Hospital, Taichung 404327, Taiwan.
  • School of Medicine, National Cheng Kung University, Tainan 701401, Taiwan.

ORCID profiles: Sen-Ei Shai, Chia-Ching Wu, Shih-Chieh Hung

Funding

  • the Ministry of Science and Technology
  • Taichung Veterans General Hospital and National Yang-Ming University
  • Yen Tjing Ling Medical Foundation
  • Taichung Veterans General Hospital
  • Taichung Veterans General Hospital and Taichung Veterans General Hospital Chiayi Branch
  • Ministry of Science and Technology

Cite

APA

Shai, S. E., Lai, Y. L., Hung, Y. W., Hsieh, C. W., Su, K. C., Wang, C. H., Chao, T. H., Chiu, Y. T., Wu, C. C., & Hung, S. C. (2024). Long-Term Survival and Regeneration Following Transplantation of 3D-Printed Biodegradable PCL Tracheal Grafts in Large-Scale Porcine Models. Bioengineering, 11(8), 832. https://doi.org/10.3390/bioengineering11080832

Vancouver

Shai SE, Lai YL, Hung YW, Hsieh CW, Su KC, Wang CH, et al. Long-Term Survival and Regeneration Following Transplantation of 3D-Printed Biodegradable PCL Tracheal Grafts in Large-Scale Porcine Models. Bioengineering. 2024;11(8):832. doi:10.3390/bioengineering11080832

BibTeX
@article{Shai2024,
  author = {Shai, Sen-Ei and Lai, Yi-Ling and Hung, Yi-Wen and Hsieh, Chi-Wei and Su, Kuo-Chih and Wang, Chun-Hsiang and Chao, Te-Hsin and Chiu, Yung-Tsung and Wu, Chia-Ching and Hung, Shih-Chieh},
  title = {Long-Term Survival and Regeneration Following Transplantation of 3D-Printed Biodegradable PCL Tracheal Grafts in Large-Scale Porcine Models},
  journal = {Bioengineering},
  year = {2024},
  volume = {11},
  number = {8},
  pages = {832},
  doi = {10.3390/bioengineering11080832}
}
Start for free →