MicroRNA-200c Release from Gelatin-Coated 3D-Printed PCL Scaffolds Enhances Bone Regeneration
ACS Biomaterials Science & Engineering · 08.04.2024 · 10 (4) · 2337-2350
DOI: 10.1021/acsbiomaterials.3c01105 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, online erschienen am 26.03.2024. Verfasst von Matthew T Remy und 5 weiteren Autor:innen. Beteiligte Einrichtung: Iowa Institute for Oral Health Research, College of Dentistry, The University of Iowa, Iowa City, Iowa 52242, United States. Hauptthemen laut MEDLINE: Osteogenesis, MicroRNAs. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIDCR NIH HHS, National Institute of Dental and Craniofacial Research.
Abstract (Originalsprache)
The fabrication of clinically relevant synthetic bone grafts relies on combining multiple biodegradable biomaterials to create a structure that supports the regeneration of defects while delivering osteogenic biomolecules that enhance regeneration. MicroRNA-200c (miR-200c) functions as a potent osteoinductive biomolecule to enhance osteogenic differentiation and bone formation; however, synthetic tissue-engineered bone grafts that sustain the delivery of miR-200c for bone regeneration have not yet been evaluated. In this study, we created novel, multimaterial, synthetic bone grafts from gelatin-coated 3D-printed polycaprolactone (PCL) scaffolds. We attempted to optimize the release of pDNA encoding miR-200c by varying gelatin types, concentrations, and polymer crosslinking materials to improve its functions for bone regeneration. We revealed that by modulating gelatin type, coating material concentration, and polymer crosslinking, we effectively altered the release rates of pDNA encoding miR-200c, which promoted osteogenic differentiation in vitro and bone regeneration in a critical-sized calvarial bone defect animal model. We also demonstrated that crosslinking the gelatin coatings on the PCL scaffolds with low-concentration glutaraldehyde was biocompatible and increased cell attachment. These results strongly indicate the potential use of gelatin-based systems for pDNA encoding microRNA delivery in gene therapy and further demonstrate the effectiveness of miR-200c for enhancing bone regeneration from synthetic bone grafts.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Iowa Institute for Oral Health Research, College of Dentistry, The University of Iowa, Iowa City, Iowa 52242, United States.
- Roy J. Carver Department of Biomedical Engineering, College of Engineering, The University of Iowa, Iowa City, Iowa 52242, United States.
ORCID-Profile: Chawin Upara, Jacob M Miszuk, Hongli Sun, Liu Hong
Förderung
- NIDCR NIH HHS
- National Institute of Dental and Craniofacial Research
Zitieren
APA
Remy, M. T., Upara, C., Ding, Q. J., Miszuk, J. M., Sun, H., & Hong, L. (2024). MicroRNA-200c Release from Gelatin-Coated 3D-Printed PCL Scaffolds Enhances Bone Regeneration. ACS Biomaterials Science & Engineering, 10(4), 2337-2350. https://doi.org/10.1021/acsbiomaterials.3c01105
Vancouver
Remy MT, Upara C, Ding QJ, Miszuk JM, Sun H, Hong L. MicroRNA-200c Release from Gelatin-Coated 3D-Printed PCL Scaffolds Enhances Bone Regeneration. ACS Biomaterials Science & Engineering. 2024;10(4):2337-2350. doi:10.1021/acsbiomaterials.3c01105
BibTeX
@article{Remy2024,
author = {Remy, Matthew T and Upara, Chawin and Ding, Qiong J and Miszuk, Jacob M and Sun, Hongli and Hong, Liu},
title = {MicroRNA-200c Release from Gelatin-Coated 3D-Printed PCL Scaffolds Enhances Bone Regeneration},
journal = {ACS Biomaterials Science & Engineering},
year = {2024},
volume = {10},
number = {4},
pages = {2337--2350},
doi = {10.1021/acsbiomaterials.3c01105}
}
EUVIMED