EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed Functionally Graded PCL-HA Scaffolds with Multi-Scale Porosity

Hatice Kubra Bilgili iD, Mehmet Serhat Aydin iD, Mervenaz Sahin iD, Sevilay Burcu Sahin, Sibel Cetinel iD, Gullu Kiziltas iD

ACS Omega · 25.02.2025 · 10 (7) · 6502-6519

DOI: 10.1021/acsomega.4c06820 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 14.02.2025. Verfasst von Hatice Kubra Bilgili und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Material Science and Nanoengineering, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul 34956, Turkey. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: T?rkiye Bilimsel ve Teknolojik Arastirma Kurumu.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Functionally graded scaffolds (FGSs) designed for bone tissue regeneration exhibit three-dimensional (3D) constructs with spatially varying pores, mirroring the natural bone structure, aiming to offer temporary support and a conducive environment for cells during tissue regeneration in defect sites. While existing research on FGSs has primarily focused on altering pore architecture and tuning biomechanical properties for improved tissue regeneration, limited exploration exists on 3D spatially varying FGSs with multiscale porosity to closely mimic natural bone. In this study, we fabricated and investigated FGSs with macropores varying radially and longitudinally, along with micropores within the struts. Utilizing nonsolvent-induced phase separation integrated with 3D printing, we printed poly­(ε-caprolactone) (PCL)/hydroxyapatite (HA) composite scaffolds with both uniform and FG geometries. Two HA content variations (10 and 20 wt %) were employed to assess their impact on scaffold properties. Rheological analysis of polymer suspensions gauged the viscosity and shear stress. Thermogravimetric analysis (thermal gravimetric analysis) determined PCL decomposition and the final HA content in the scaffold. Morphological properties, including porosity, pore size, and pore distribution, were evaluated using microcomputed tomography (micro-CT), while field-emission scanning electron microscopy imaged scaffold surface and cross-sectional morphology. Mechanical tests (compression and tension) assessed the scaffold strength. In vitro assays with MC3T3-E1 preosteoblast cells measured cell viability and alkaline phosphatase enzyme activity in uniform and FGSs with 10% and 20% HA content. Results confirmed that the achieved porosity levels provided sufficient strength and supported effective cell proliferation. Cell culture results demonstrated that uniform scaffolds with 10% HA promoted osteogenesis with slow cell proliferation, whereas FGSs with 20% HA promoted both proliferation and osteogenesis of preosteoblast cells. Overall, the structural, compositional, and biological characterization indicated that both uniform and FGSs provide suitable environments for bone tissue regeneration, with functionally graded scaffold morphology potentially offering a favorable environment for cell response.

Autor:innen und Institutionen

  • Department of Material Science and Nanoengineering, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul 34956, Turkey.
  • Division of Human Mechanical Systems and Design, Graduate School of Engineering, Hokkaido University, Sapporo 060-8628, Japan.
  • Center for Translational Oral Research (TOR), Department of Clinical Dentistry, Faculty of Medicine, University of Bergen, Bergen 5009, Norway.
  • Department of Molecular Biology, Genetics and Bioengineering, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul 34956, Turkey.
  • Sabanci University Nanotechnology Research and Application Center, Istanbul 34956, Turkey.
  • Department of Mechatronics, Faculty of Engineering and Natural Sciences, Sabanci University, Istanbul 34956, Turkey.

ORCID-Profile: Hatice Kubra Bilgili, Mehmet Serhat Aydin, Mervenaz Sahin, Sibel Cetinel, Gullu Kiziltas

Förderung

  • T?rkiye Bilimsel ve Teknolojik Arastirma Kurumu

Zitieren

APA

Bilgili, H. K., Aydin, M. S., Sahin, M., Sahin, S. B., Cetinel, S., & Kiziltas, G. (2025). 3D-Printed Functionally Graded PCL-HA Scaffolds with Multi-Scale Porosity. ACS Omega, 10(7), 6502-6519. https://doi.org/10.1021/acsomega.4c06820

Vancouver

Bilgili HK, Aydin MS, Sahin M, Sahin SB, Cetinel S, Kiziltas G. 3D-Printed Functionally Graded PCL-HA Scaffolds with Multi-Scale Porosity. ACS Omega. 2025;10(7):6502-6519. doi:10.1021/acsomega.4c06820

BibTeX
@article{Bilgili2025,
  author = {Bilgili, Hatice Kubra and Aydin, Mehmet Serhat and Sahin, Mervenaz and Sahin, Sevilay Burcu and Cetinel, Sibel and Kiziltas, Gullu},
  title = {3D-Printed Functionally Graded PCL-HA Scaffolds with Multi-Scale Porosity},
  journal = {ACS Omega},
  year = {2025},
  volume = {10},
  number = {7},
  pages = {6502--6519},
  doi = {10.1021/acsomega.4c06820}
}
Kostenlos starten →