EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Erosion Behavior and Structural Optimization of a Drill-Bit-Integrated Vibration Detection Tool Based on CFD–DPM

Jizhou Jia, Lei Shi, Chen Yu, Zhihao Jiang, Yinlong Xie

Applied Sciences · 05.11.2026 · 16 (21) · 10982

DOI: 10.3390/app162110982 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 05.11.2026. Verfasst von Jizhou Jia und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Drill-bit-integrated vibration sensors face localized erosion from sand-laden drilling fluid. We applied a computational fluid dynamics–discrete phase model (CFD–DPM) incorporating the realizable k–ε turbulence, Forder rebound, and Oka erosion models to analyze erosion and optimize tool geometry. Erosion was concentrated at channel transitions and guide-bracket roots. Among the investigated conditions, inlet velocity produced the largest variation in predicted erosion, and 200 μm particles generated the highest erosion among four tested sizes. An optimized design with a 45° semi-conical guide hood, two guide brackets, and a 4 mm root fillet reduced the predicted maximum erosion flux from 7.62 × 10−4 to 2.21 × 10−4 kg·m−2·s−1, or approximately 71%. Sampling variability was assessed through five DPM repeats per condition; fine-grid convergence indices were 1.88% and 2.94% for the baseline and optimized geometries, respectively. Prototype tests confirmed signal acquisition and rotation tracking. Sand-laden erosion tests at 15 m·s−1, 100 μm, and 0.01 kg·s−1, using three specimens per geometry and 1800 s exposure, showed 56.72% lower overall mass-loss rate and 69.54% lower registered local-window depth rate. These short-duration measurements support erosion mitigation, but do not directly validate the predicted peak-flux reduction.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Jia, J., Shi, L., Yu, C., Jiang, Z., & Xie, Y. (2026). Erosion Behavior and Structural Optimization of a Drill-Bit-Integrated Vibration Detection Tool Based on CFD–DPM. Applied Sciences, 16(21), 10982. https://doi.org/10.3390/app162110982

Vancouver

Jia J, Shi L, Yu C, Jiang Z, Xie Y. Erosion Behavior and Structural Optimization of a Drill-Bit-Integrated Vibration Detection Tool Based on CFD–DPM. Applied Sciences. 2026;16(21):10982. doi:10.3390/app162110982

BibTeX
@article{Jia2026,
  author = {Jia, Jizhou and Shi, Lei and Yu, Chen and Jiang, Zhihao and Xie, Yinlong},
  title = {Erosion Behavior and Structural Optimization of a Drill-Bit-Integrated Vibration Detection Tool Based on CFD–DPM},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {10982},
  doi = {10.3390/app162110982}
}
Kostenlos starten →