CFD-DPM Model of Gas–Solid Two-Phase Flow Erosion of Needle Throttle Valve
Coatings · 19.02.2025 · 15 (2) · 248
DOI: 10.3390/coatings15020248 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 19.02.2025. Verfasst von Zhihui Zhao und 7 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Chongqing Municipality.
Abstract (Originalsprache)
During shale gas field production, wellhead throttle valves are prone to erosion caused by solid particles carried in the gas stream, posing significant safety risks. Existing studies on erosion primarily focus on simple structure like elbows and tees, while research on gas–solid two-phase flow erosion in needle throttle valves remains limited. This paper establishes a numerical model based on the CFD-DPM approach, integrating actual shale gas field production conditions to investigate the erosion behavior of needle throttle valves under varying openings, particle sizes, inlet velocities, and particle mass flow rates. The results show that the valve spool consistently exhibits the highest erosion rate among all components, with the most severe erosion localized at its front end. At a 1/4 opening, particles colliding with the spool exhibit significantly increased frequency and energy when re-entering the upstream pipeline, raising the risk of blockages. Furthermore, when the opening exceeds 2/4, the valve chamber experiences higher erosion rates than the upstream and downstream pipelines. This study provides critical insights for optimizing valve design and maintenance strategies, thereby enhancing service life and ensuring safe shale gas production.
Förderung
- Natural Science Foundation of Chongqing Municipality
Zitieren
APA
Zhao, Z., Wu, Z., Wang, W., Wang, X., Du, S., Chen, X., Li, P., & Wang, Y. (2025). CFD-DPM Model of Gas–Solid Two-Phase Flow Erosion of Needle Throttle Valve. Coatings, 15(2), 248. https://doi.org/10.3390/coatings15020248
Vancouver
Zhao Z, Wu Z, Wang W, Wang X, Du S, Chen X, et al. CFD-DPM Model of Gas–Solid Two-Phase Flow Erosion of Needle Throttle Valve. Coatings. 2025;15(2):248. doi:10.3390/coatings15020248
BibTeX
@article{Zhao2025,
author = {Zhao, Zhihui and Wu, Zhe and Wang, Weiqiang and Wang, Xingyu and Du, Shengnan and Chen, Xianlei and Li, Panfeng and Wang, Yingying},
title = {CFD-DPM Model of Gas–Solid Two-Phase Flow Erosion of Needle Throttle Valve},
journal = {Coatings},
year = {2025},
volume = {15},
number = {2},
pages = {248},
doi = {10.3390/coatings15020248}
}
EUVIMED