EUVIMEDEUVIMED entdecken
Crossref

Optimization of Drill Bit Geometries for Minimum Thermal Damage in Bone Drilling

Mohd Faizal Ali Akhbar, Mohamad Faris Mohd Ashri, Ahmad Razlan Yusoff, Shahrizan Jamaludin, Rodianah Alias, Fatin Alias, Razhan Hassan, Muhammad Rizwan

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences · 20.10.2024 · 122 (2) · 22-37

DOI: 10.37934/arfmts.122.2.2237 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, online erschienen am 20.10.2024. Verfasst von Mohd Faizal Ali Akhbar und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal injury is a common post-operative effect in bone drilling surgeries. The extreme heat generated during the drilling process kills bone cells, which causes irreversible bone death. This bone death loosens medical fixations—screws, plates, and implants—and subsequently refractures the bone. Research on drill bit geometries in bone drilling has attracted interest from engineering and medical researchers. However, previous research has mainly focused on the simulation of bone drilling, which could generate an incorrect approximation of thermal bone damage if the simulation model is not validated. For this reason, this study focuses on the optimization and parametric analysis of the bone temperature elevations induced by customized drill bit features—point angle (60-180°), web thickness (25-50 %), and helix angle (10-55°)—in comprehensive ex-vivo bone (bovine) experimental drilling tests. The L9 Taguchi optimization method was then applied to determine the optimal design to minimize maximum bone temperature rise. Results from the parametric analysis revealed that the optimal setup for the drill point features can be obtained with the ranges of point angle of 160-180°, web thickness of 25-30 %, and helix angle of 30-40°. Based on the Taguchi optimization results, the minimum thermal damage is produced with the point angle of 180°, web thickness of 25 %, and helix angle of 35°. This work offers a promising solution for reducing thermal injury and preventing thermal osteonecrosis in bone drilling surgeries.

Zitieren

APA

Akhbar, M. F. A., Ashri, M. F. M., Yusoff, A. R., Jamaludin, S., Alias, R., Alias, F., Hassan, R., & Rizwan, M. (2024). Optimization of Drill Bit Geometries for Minimum Thermal Damage in Bone Drilling. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 122(2), 22-37. https://doi.org/10.37934/arfmts.122.2.2237

Vancouver

Akhbar MFA, Ashri MFM, Yusoff AR, Jamaludin S, Alias R, Alias F, et al. Optimization of Drill Bit Geometries for Minimum Thermal Damage in Bone Drilling. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 2024;122(2):22-37. doi:10.37934/arfmts.122.2.2237

BibTeX
@article{Akhbar2024,
  author = {Akhbar, Mohd Faizal Ali and Ashri, Mohamad Faris Mohd and Yusoff, Ahmad Razlan and Jamaludin, Shahrizan and Alias, Rodianah and Alias, Fatin and Hassan, Razhan and Rizwan, Muhammad},
  title = {Optimization of Drill Bit Geometries for Minimum Thermal Damage in Bone Drilling},
  journal = {Journal of Advanced Research in Fluid Mechanics and Thermal Sciences},
  year = {2024},
  volume = {122},
  number = {2},
  pages = {22--37},
  doi = {10.37934/arfmts.122.2.2237}
}
Kostenlos starten →