EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printing and Characterization of HA/Mg-Reinforced PLA–PHA–PHB Composite Scaffolds for Biomedical Applications

Motahareh Sadat Raziyan, Giedrius Janusas, Wojciech Grodzki, Ewa Borucińska-Parfieniuk, Sigita Urbaite, Dariusz M. Perkowski

Applied Sciences · 08.04.2026 · 16 (8) · 3647

DOI: 10.3390/app16083647 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.04.2026. Verfasst von Motahareh Sadat Raziyan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research introduces a new hydroxyapatite-based composite, designed as a bone-implant scaffold—easy, quick, economical, and closely mimicking the structure of natural bone. Additive manufacture was used to print bioactive material to form a scaffold structure. Thus, during the experimental research, three different composite materials were made to examine both their mechanical and morphological properties. Numerical modeling was used to maximize and prove the mechanical and biological performance of the HA-polymer grafts. The obtained results indicated that incorporating HA and Mg particles into a polymeric matrix allows the structure to be used in tissue engineering. Best results were obtained using a structure, designed from PLA and PHA at 30%, PHB at 25%, Mg at 5%, and HA at 10%. The composite was distinguished by its lightness, strength, and biocompatibility, making it suitable for tissue engineering.

Zitieren

APA

Raziyan, M. S., Janusas, G., Grodzki, W., Borucińska-Parfieniuk, E., Urbaite, S., & Perkowski, D. M. (2026). 3D Printing and Characterization of HA/Mg-Reinforced PLA–PHA–PHB Composite Scaffolds for Biomedical Applications. Applied Sciences, 16(8), 3647. https://doi.org/10.3390/app16083647

Vancouver

Raziyan MS, Janusas G, Grodzki W, Borucińska-Parfieniuk E, Urbaite S, Perkowski DM. 3D Printing and Characterization of HA/Mg-Reinforced PLA–PHA–PHB Composite Scaffolds for Biomedical Applications. Applied Sciences. 2026;16(8):3647. doi:10.3390/app16083647

BibTeX
@article{Raziyan2026,
  author = {Raziyan, Motahareh Sadat and Janusas, Giedrius and Grodzki, Wojciech and Borucińska-Parfieniuk, Ewa and Urbaite, Sigita and Perkowski, Dariusz M.},
  title = {3D Printing and Characterization of HA/Mg-Reinforced PLA–PHA–PHB Composite Scaffolds for Biomedical Applications},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {3647},
  doi = {10.3390/app16083647}
}
Kostenlos starten →