Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing
Polymers · 26.07.2024 · 16 (15) · 2135
DOI: 10.3390/polym16152135 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.07.2024. Verfasst von Andong Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Polylactic acid (PLA) composite serve as widely used filaments in fused deposition modeling (FDM) 3D printing. This study investigates the enhancement of PLA composite’s comprehensive mechanical properties and thermal stability through the incorporation of carbon fiber (CF). The influence of FDM process parameters on the mechanical properties of PLA composite is also analyzed. Results show that adding 5 wt.% CF significantly enhances the stiffness and comprehensive mechanical properties of PLA composite. The order of printing factors affecting the tensile strength of the PLA composite product is as follows: printing layer thickness, bottom plate temperature, printing speed, and nozzle temperature. Finally, optimal tensile strength is achieved under specific conditions: 0.1 mm layer thickness, 60 °C bottom plate temperature, 40 mm/s printing speed, and 215 °C nozzle temperature.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013, China.
ORCID-Profile: Andong Wang, Caifeng Chen
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, A., Tang, X., Zeng, Y., Zou, L., Bai, F., & Chen, C. (2024). Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing. Polymers, 16(15), 2135. https://doi.org/10.3390/polym16152135
Vancouver
Wang A, Tang X, Zeng Y, Zou L, Bai F, Chen C. Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing. Polymers. 2024;16(15):2135. doi:10.3390/polym16152135
BibTeX
@article{Wang2024,
author = {Wang, Andong and Tang, Xinting and Zeng, Yongxian and Zou, Lei and Bai, Fan and Chen, Caifeng},
title = {Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing},
journal = {Polymers},
year = {2024},
volume = {16},
number = {15},
pages = {2135},
doi = {10.3390/polym16152135}
}
EUVIMED