In Vitro Assessment of Plant-Based 3D-Printed Resin for Dental Model Applications
Al-Rafidain Dental Journal · 2026
DOI: 10.33899/f6r86j32 ↗Kurz gefasst
Fachartikel in der Zeitschrift Al-Rafidain Dental Journal, 2026. Verfasst von Mohammed M Sadoon. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Aims
This study aimed to assess the mechanical properties (Flexural strength, Compression strength, and hardness) and accuracy (trueness and precision) of plant-based resin as dental models in relation to conventional resin. Materials and Methods: Sixty specimens for mechanical properties (20 specimens for each test) evaluation and 20 dental models were fabricated using two types of 3D printing resins (plant-based and conventional) printed by an LCD 3D printer with 75 µm layer thickness and zero-degree printing orientation. The mechanical performance was assessed through flexural strength, compressive strength, and hardness testing. Dimensional accuracy was evaluated by digitally scanning the printed models with a lab scanner and analyzing the datasets using Geomagic Control X software.
Results
Descriptive analysis and an independent samples t-test were performed. The results show that the plant-based resin exhibited equivalent values to those of the conventional model resin for flexural strengths (49.81±3.47 MP, 48.41±4.14 MP respectively), compressive strengths (4127.39±1.1MP, 127.3±0.59 MP respectively), and hardness (70.68±0.49 and 70.72± 1.12 respectively). No statistically significant differences (p=0.105) were observed between the two resin types in terms of model trueness, whereas the plant-based resin demonstrated higher precision than the conventional resin (0.184±0.04 and 0.257± 0.09 mm, respectively).
Conclusion
Plant-based resins demonstrate mechanical and dimensional properties comparable to those of conventional 3D-printed model resin. Plant-based resin shows superior precision to conventional resin.
Zitieren
APA
Sadoon, M. M. (2026). In Vitro Assessment of Plant-Based 3D-Printed Resin for Dental Model Applications. Al-Rafidain Dental Journal. https://doi.org/10.33899/f6r86j32
Vancouver
Sadoon MM. In Vitro Assessment of Plant-Based 3D-Printed Resin for Dental Model Applications. Al-Rafidain Dental Journal. 2026. doi:10.33899/f6r86j32
BibTeX
@article{Sadoon2026,
author = {Sadoon, Mohammed M},
title = {In Vitro Assessment of Plant-Based 3D-Printed Resin for Dental Model Applications},
journal = {Al-Rafidain Dental Journal},
year = {2026},
doi = {10.33899/f6r86j32}
}
EUVIMED