EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 3D printed plant model for accurate and reliable 3D plant phenotyping

Jonas Bömer iD, Felix Esser iD, Elias Marks iD, Radu Alexandru Rosu iD, Sven Behnke iD, Lasse Klingbeil iD, Heiner Kuhlmann iD, Cyrill Stachniss iD, Anne-Katrin Mahlein iD, Stefan Paulus iD

GigaScience · 02.01.2024 · 13

DOI: 10.1093/gigascience/giae035 ↗

Kurz gefasst

Fachartikel in der Zeitschrift GigaScience, online erschienen am 20.06.2024. Verfasst von Jonas Bömer und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Sugar Beet Research (IfZ), Göttingen 37079, Germany. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Phenotype, Beta vulgaris. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Food and Agriculture, Deutsche Forschungsgemeinschaft.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

This study addresses the importance of precise referencing in 3-dimensional (3D) plant phenotyping, which is crucial for advancing plant breeding and improving crop production. Traditionally, reference data in plant phenotyping rely on invasive methods. Recent advancements in 3D sensing technologies offer the possibility to collect parameters that cannot be referenced by manual measurements. This work focuses on evaluating a 3D printed sugar beet plant model as a referencing tool.

Results

Fused deposition modeling has turned out to be a suitable 3D printing technique for creating reference objects in 3D plant phenotyping. Production deviations of the created reference model were in a low and acceptable range. We were able to achieve deviations ranging from −10 mm to +5 mm. In parallel, we demonstrated a high-dimensional stability of the reference model, reaching only ±4 mm deformation over the course of 1 year. Detailed print files, assembly descriptions, and benchmark parameters are provided, facilitating replication and benefiting the research community.

Conclusion

Consumer-grade 3D printing was utilized to create a stable and reproducible 3D reference model of a sugar beet plant, addressing challenges in referencing morphological parameters in 3D plant phenotyping. The reference model is applicable in 3 demonstrated use cases: evaluating and comparing 3D sensor systems, investigating the potential accuracy of parameter extraction algorithms, and continuously monitoring these algorithms in practical experiments in greenhouse and field experiments. Using this approach, it is possible to monitor the extraction of a nonverifiable parameter and create reference data. The process serves as a model for developing reference models for other agricultural crops.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalPhenotypeBeta vulgarisPlant Breeding

Stichwörter der Autor:innen

3D plant phenotyping3D printingreference

Autor:innen und Institutionen

  • Institute of Sugar Beet Research (IfZ), Göttingen 37079, Germany.
  • Institute for Geodesy and Geoinformation (IGG), University of Bonn, Bonn 53115, Germany.
  • Center for Robotics, University of Bonn, Bonn 53115, Germany.
  • Institute for Computer Science VI-Autonomous Intelligent Systems (AIS), University of Bonn, Bonn 53115, Germany.

ORCID-Profile: Jonas Bömer, Felix Esser, Elias Marks, Radu Alexandru Rosu, Sven Behnke, Lasse Klingbeil, Heiner Kuhlmann, Cyrill Stachniss, Anne-Katrin Mahlein, Stefan Paulus

Förderung

  • Federal Ministry of Food and Agriculture
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Bömer, J., Esser, F., Marks, E., Rosu, R. A., Behnke, S., Klingbeil, L., Kuhlmann, H., Stachniss, C., Mahlein, A. K., & Paulus, S. (2024). A 3D printed plant model for accurate and reliable 3D plant phenotyping. GigaScience, 13. https://doi.org/10.1093/gigascience/giae035

Vancouver

Bömer J, Esser F, Marks E, Rosu RA, Behnke S, Klingbeil L, et al. A 3D printed plant model for accurate and reliable 3D plant phenotyping. GigaScience. 2024;13. doi:10.1093/gigascience/giae035

BibTeX
@article{Bmer2024,
  author = {Bömer, Jonas and Esser, Felix and Marks, Elias and Rosu, Radu Alexandru and Behnke, Sven and Klingbeil, Lasse and Kuhlmann, Heiner and Stachniss, Cyrill and Mahlein, Anne-Katrin and Paulus, Stefan},
  title = {A 3D printed plant model for accurate and reliable 3D plant phenotyping},
  journal = {GigaScience},
  year = {2024},
  volume = {13},
  doi = {10.1093/gigascience/giae035}
}
Kostenlos starten →