Mechanical and Biocompatibility Properties of 3D-Printed Dental Resin Reinforced with Glass Silica and Zirconia Nanoparticles: In Vitro Study
Polymers · 30.05.2023 · 15 (11) · 2523
DOI: 10.3390/polym15112523 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 30.05.2023. Verfasst von Abdullah Alshamrani und 3 weiteren Autor:innen. Beteiligte Einrichtung: Oral Rehabilitation & Dental Biomaterial and Bioengineering, The University of Sydney, Sydney 2006, Australia. Die Arbeit wurde bisher 103-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study aimed to assess the mechanical and biocompatibility properties of dental resin reinforced with different nanoparticle additives. Temporary crown specimens were 3D-printed and grouped based on nanoparticle type and amount, including zirconia and glass silica. Flexural strength testing evaluated the material’s ability to withstand mechanical stress using a three-point bending test. Biocompatibility was tested using MTT and dead/live cell assays to assess effects on cell viability and tissue integration. Fractured specimens were analysed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) for fracture surface examination and elemental composition determination. Results show that adding 5% glass fillers and 10–20% zirconia nanoparticles significantly improves the flexural strength and biocompatibility of the resin material. Specifically, the addition of 10%, 20% zirconia, and 5% glass silica by weight significantly increases the flexural strength of the 3D-printed resins. Biocompatibility testing reveals cell viabilities greater than 80% in all tested groups. Reinforced 3D-printed resin holds clinical potential for restorative dentistry, as zirconia and glass fillers have been shown to enhance mechanical and biocompatibility properties of dental resin, making it a promising option for dental restorations. The findings of this study may contribute to the development of more effective and durable dental materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Oral Rehabilitation & Dental Biomaterial and Bioengineering, The University of Sydney, Sydney 2006, Australia.
- Department of Dental Health, College of Applied Medical Sciences, King Saud University, Riyadh P.O. Box 12372, Saudi Arabia.
- The Cellular and Molecular Pathology Research Unit, Oral Pathology and Oral Medicine, School of Dentistry, The University of Sydney, Westmead Hospital, Westmead 2145, Australia.
ORCID-Profile: Abdullah Alshamrani, Abdulaziz Alhotan, Ayman Ellakwa
Zitieren
APA
Alshamrani, A., Alhotan, A., Kelly, E., & Ellakwa, A. (2023). Mechanical and Biocompatibility Properties of 3D-Printed Dental Resin Reinforced with Glass Silica and Zirconia Nanoparticles: In Vitro Study. Polymers, 15(11), 2523. https://doi.org/10.3390/polym15112523
Vancouver
Alshamrani A, Alhotan A, Kelly E, Ellakwa A. Mechanical and Biocompatibility Properties of 3D-Printed Dental Resin Reinforced with Glass Silica and Zirconia Nanoparticles: In Vitro Study. Polymers. 2023;15(11):2523. doi:10.3390/polym15112523
BibTeX
@article{Alshamrani2023,
author = {Alshamrani, Abdullah and Alhotan, Abdulaziz and Kelly, Elizabeth and Ellakwa, Ayman},
title = {Mechanical and Biocompatibility Properties of 3D-Printed Dental Resin Reinforced with Glass Silica and Zirconia Nanoparticles: In Vitro Study},
journal = {Polymers},
year = {2023},
volume = {15},
number = {11},
pages = {2523},
doi = {10.3390/polym15112523}
}
EUVIMED