EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Customized 3-D–printed drill guide casts enable accurate wire placement for external skeletal fixation in the canine antebrachium

Elaina L Peterson, Mu Young Kim, Stanley E Kim

American Journal of Veterinary Research · 2025

DOI: 10.2460/ajvr.25.06.0198 ↗

Kurz gefasst

Fachartikel in der Zeitschrift American Journal of Veterinary Research, 2025. Verfasst von Elaina L Peterson und 2 weiteren Autor:innen. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bone Wires, Forelimb, Radius. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To evaluate the feasibility and accuracy of customized 3-D–printed casts, created using virtual surgical planning, to guide wire placement for external skeletal fixation in the canine radius.

Methods

This experimental cadaver study used normal forelimbs from medium-sized canine cadavers (19 to 23 kg). Computed tomography scans were performed to generate 3-D bone and soft tissue models. Customized 3-D–printed casts with cylindrical drill guides were designed and applied to each forelimb. Wires were drilled through the casts at distal, middle, and proximal locations along the radius and subsequently removed. Postprocedural CT scans were obtained. Pre- and postdrilling bone models were superimposed to calculate wire angle errors in the frontal and transverse planes and the distance between the planned and actual points of wire intersection (wire intersection error).

Results

Both forelimbs of 6 cadavers were used. Of 72 planned wires, 70 were successfully placed. Median wire error angles were 1° in the frontal plane and 2° in the transverse plane. The median wire intersection error was 1 mm (range, 0 to 5 mm). Wire placements at proximal locations had greater error than those at middle and distal sites. No procedural complications were identified.

Conclusions

Customized 3-D–printed drill guide casts enabled accurate wire placement in the canine radius with minimal deviation from planned trajectories. Proximal locations showed slightly reduced accuracy. Clinical Relevance This technique may facilitate precise and repeatable application of external skeletal fixator wires in dogs, potentially improving outcomes for limb deformity correction.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalBone WiresForelimbRadiusExternal FixatorsCasts, SurgicalAnimalsDogsCadaverTomography, X-Ray Computed

Stichwörter der Autor:innen

3-D printingangular forelimb deformitycustomized surgical guidesexternal skeletal fixationsurgical planning

Zitieren

APA

Peterson, E. L., Kim, M. Y., & Kim, S. E. (2025). Customized 3-D–printed drill guide casts enable accurate wire placement for external skeletal fixation in the canine antebrachium. American Journal of Veterinary Research. https://doi.org/10.2460/ajvr.25.06.0198

Vancouver

Peterson EL, Kim MY, Kim SE. Customized 3-D–printed drill guide casts enable accurate wire placement for external skeletal fixation in the canine antebrachium. American Journal of Veterinary Research. 2025. doi:10.2460/ajvr.25.06.0198

BibTeX
@article{Peterson2025,
  author = {Peterson, Elaina L and Kim, Mu Young and Kim, Stanley E},
  title = {Customized 3-D–printed drill guide casts enable accurate wire placement for external skeletal fixation in the canine antebrachium},
  journal = {American Journal of Veterinary Research},
  year = {2025},
  doi = {10.2460/ajvr.25.06.0198}
}
Kostenlos starten →