EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade

Tibor Kvackaj, Jana Bidulská iD, Alica Fedoríková, Róbert Bidulský iD

Materials · 22.01.2025 · 18 (3) · 499

DOI: 10.3390/ma18030499 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 22.01.2025. Verfasst von Tibor Kvackaj und 3 weiteren Autor:innen. Beteiligte Einrichtung: Bodva Industry and Innovation Cluster, Budulov 174, 04501 Moldava nad Bodvou, Slovakia. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 106 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU Next Generation EU through the Recovery and Resilience Plan for Slovakia, EU Next Generation EU.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main goal of this contribution is to evaluate the mechanical properties, strengthening contributions and microstructure development of austenitic stainless steel AISI 316 LN with high nitrogen content in the states characterized as the initial state and the states after rolling with different thickness deformations. The initial state was represented by solution annealing (777 K/60 min). The deformation state was characterized by rolling thickness reductions carried out at ambient temperature (TA = 295 K) with deformations in the range ε ∈ (0; 50> [%]. Studies of microstructures, mechanical properties and strengthening contributions before and after rolling were carried out. The initial state after solution annealing was as follows: offset yield strength Rp0.2 = 325 MPa, elongation A5 = 49% and diameter of grain size d = 214 μm. The state after ambient rolling with thickness deformation ε = 50% was as follows: Rp0.2 = 994 MPa, A5 = 4% and d = 64 μm. The maximum contribution to strengthening after rolling processing with 50% thickness deformation was dislocations (∆ R P0.2_DS = 560 MPa) followed by twins (∆ R P0.2_DT =140 MPa).

Schlagwörter

Stichwörter der Autor:innen

AISI 316 LNambient rollingmechanical propertiesstrengthening contributions

Autor:innen und Institutionen

  • Bodva Industry and Innovation Cluster, Budulov 174, 04501 Moldava nad Bodvou, Slovakia.
  • Institute of Materials, Faculty of Materials, Metallurgy and Recycling, Technical University of Košice, Letná 9, 04200 Košice, Slovakia.
  • Department of Material Analysis, Research Centre Řež, Hlavní 130, 25068 Husinec, Czech Republic.
  • Advanced Research and Innovation Hub, Budulov 174, 04501 Moldava nad Bodvou, Slovakia.

ORCID-Profile: Jana Bidulská, Róbert Bidulský

Förderung

  • EU Next Generation EU through the Recovery and Resilience Plan for Slovakia
  • EU Next Generation EU

Zitieren

APA

Kvackaj, T., Bidulská, J., Fedoríková, A., & Bidulský, R. (2025). Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade. Materials, 18(3), 499. https://doi.org/10.3390/ma18030499

Vancouver

Kvackaj T, Bidulská J, Fedoríková A, Bidulský R. Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade. Materials. 2025;18(3):499. doi:10.3390/ma18030499

BibTeX
@article{Kvackaj2025,
  author = {Kvackaj, Tibor and Bidulská, Jana and Fedoríková, Alica and Bidulský, Róbert},
  title = {Mechanical Properties and Strengthening Contributions of AISI 316 LN Austenitic Stainless Steel Grade},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {499},
  doi = {10.3390/ma18030499}
}
Kostenlos starten →