Microstructure Characterization of Bending Effects in 304L Stainless Steel Cladded with Low‐Alloy Steel Weld
steel research international · 19.04.2026
DOI: 10.1002/srin.202501144 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 19.04.2026. Verfasst von Ali Fahem und 2 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UoL.
Abstract (Originalsprache)
This study investigates the effects of preapplied mechanical bending on microstructural evolution and defect formation during subsequent metal inert gas (MIG) welding of 304L stainless steel clad onto Q345R low‐alloy steel using a 316L filler. A set of references, bent‐only, welded‐only, and bent‐plus‐welded specimens, is examined by optical microscopy, scanning electron microscopy, and electron backscatter diffraction. In the bent‐only condition, 304L exhibits deformation twinning and strain localization, whereas Q345R shows elongated ferritic grains and gradual orientation gradients. Microhardness ranges from approximately 200 HV 0.5 in Q345R to 250 HV 0.5 in 304L, with local peaks of 275 HV 0.5 at the interface. Tensile tests indicate yield stresses of about 580–588 MPa in 304L and 450 MPa in Q345R, while toughness values range from 148 to 226 J depending on orientation and cladding thickness. Welding produces columnar solidification in the fusion zone, recrystallized austenite on the stainless face, and a narrow martensitic band in the heat‐affected zone (HAZ) of Q345R. The combined bend‐weld sequence intensifies interfacial heterogeneity, with increased misorientation, geometrically necessary dislocation clustering, and enhanced defect susceptibility near the trimaterial junction. Findings indicate that prior bending conditions the weld thermal cycle and promotes strain‐assisted microstructural pathways and defect initiation near the interface.
Förderung
- UoL
Zitieren
APA
Fahem, A., Elmukashfi, E., & Dong, H. (2026). Microstructure Characterization of Bending Effects in 304L Stainless Steel Cladded with Low‐Alloy Steel Weld. steel research international. https://doi.org/10.1002/srin.202501144
Vancouver
Fahem A, Elmukashfi E, Dong H. Microstructure Characterization of Bending Effects in 304L Stainless Steel Cladded with Low‐Alloy Steel Weld. steel research international. 2026. doi:10.1002/srin.202501144
BibTeX
@article{Fahem2026,
author = {Fahem, Ali and Elmukashfi, Elsiddig and Dong, Hong},
title = {Microstructure Characterization of Bending Effects in 304L Stainless Steel Cladded with Low‐Alloy Steel Weld},
journal = {steel research international},
year = {2026},
doi = {10.1002/srin.202501144}
}
EUVIMED