HIGH-COOLING EXTRUDATE FDM 3D PRINTING OF LIGHTWEIGHT PATTERNS FOR THE LOST FOAM CASTING PROCESS
Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (3) · 47-56
DOI: 10.23939/ujmems2026.03.047 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Volodymyr Doroshenko und 1 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben.
Abstract (Originalsprache)
Traditional Fused Deposition Modeling (FDM) 3D printing of thin-walled lightweight patterns for metal casting using the Lost Foam Casting (LFC) process is currently practically not applied in industry due to the difficulty of achieving a pattern bulk density comparable to traditional expanded polystyrene (EPS). When attempting to print thin-walled shell structures with internal cavities, standard atmospheric air cooling is insufficient to ensure the instantaneous solidification of horizontal bridges, struts, and cantilever elements. This leads to sagging of the suspended polymer filament under its own weight or requires the construction of additional internal support structures, the removal of which from the closed shell cavity is practically impossible and causes an unacceptable increase in pattern mass. This study aims to develop and scientifically substantiate an FDM printing method with intensified filament cooling to ensure high-speed supportless formation of thin-walled shell patterns from polylactic acid (PLA) while maintaining their geometric accuracy, high resistance to molding sand pressure, and optimal bulk density. A comprehensive methodology was applied, combining analytical estimation of shell pattern strength and rigidity under external sand mold pressure based on 3D computer models, experimental investigations of a new method for micro-dosed polymer extrudate cooling using a liquid coolant (water) at the nozzle exit through latent heat of vaporization absorption, and industrial testing during iron casting production. As a result, the "Vape3D Print" intensified cooling method was implemented, utilizing phase transition of micro-dosed water into vapor in the extrusion zone. This ensures rapid solidification of the hot extrudate during the printing of horizontal elements while preserving sufficient residual adhesion to previous layers and preventing the accumulation of liquid moisture in the printing zone. Thin-walled shell patterns were produced with a PLA consumption of only 31.52 kg/m³, fully meeting the density requirements for traditional EPS patterns (up to 44 kg/m³). The safety factor for shell element stability against sand pressure proved sufficient for industrial application. To efficiently evacuate increased volumes of PLA thermal degradation gases from the mold cavity, vent system elements were substantiated, including wall micro-perforation or overflows with a total pore area of 2-5% of the pattern surface. The scientific novelty lies in establishing the regularities governing the instantaneous quenching of the polymer layer during printing via forced water vaporization in the printing zone, thereby enabling the formation of complex horizontal and cantilever elements without internal supports. The practical value includes full automation of LFC pattern fabrication on standard FDM printers based on digital CAD models, elimination of manual assembly, improved environmental safety due to the absence of soot formation, and increased yield of sound castings through direct 3D printing of optimized vent elements (overflows) integrated into the pattern. Further research prospects involve optimizing vapor cooling regimes for printing large-scale patterns with complex curved surfaces and adapting supportless printing technology to structural components in adjacent industries.
Zitieren
APA
Doroshenko, V., & Nebozhak, І. (2026). HIGH-COOLING EXTRUDATE FDM 3D PRINTING OF LIGHTWEIGHT PATTERNS FOR THE LOST FOAM CASTING PROCESS. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(3), 47-56. https://doi.org/10.23939/ujmems2026.03.047
Vancouver
Doroshenko V, Nebozhak І. HIGH-COOLING EXTRUDATE FDM 3D PRINTING OF LIGHTWEIGHT PATTERNS FOR THE LOST FOAM CASTING PROCESS. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(3):47-56. doi:10.23939/ujmems2026.03.047
BibTeX
@article{Doroshenko2026,
author = {Doroshenko, Volodymyr and Nebozhak, Іvan},
title = {HIGH-COOLING EXTRUDATE FDM 3D PRINTING OF LIGHTWEIGHT PATTERNS FOR THE LOST FOAM CASTING PROCESS},
journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
year = {2026},
volume = {12},
number = {3},
pages = {47--56},
doi = {10.23939/ujmems2026.03.047}
}
EUVIMED