EUVIMEDEUVIMED entdecken
Crossref

Dimension prediction, property analysis, and application of laser cladding Ni60 coating on 316L steel

Lilan Liu, Boyu Guo, Yingkai Qin, Sicong Li, Feiyan Han

Journal of Laser Applications · 01.11.2026 · 38 (4)

DOI: 10.2351/7.0001896 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 29.10.2026. Verfasst von Lilan Liu und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Science and Technology Program of Shaanxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser cladding of high-quality alloys on metal substrates has been considered as an excellent method to repair or strengthen the surfaces of mechanical parts. In order to prepare Ni60 alloy coatings with required geometric dimensions on 316L stainless steel, dimension prediction methods based on orthogonal experiments and mathematical statistics are proposed. First, the dimension prediction models of the single-track coating are established, which describe the nonlinear relationships between the width and height of the coating and process parameters. Then, based on the single-track dimension prediction models, the prediction models of width and height of the multitrack coating are derived considering the effects of track number and overlap rate. In addition, the microstructure and the phase of the Ni60 coating are observed and analyzed. The results indicate that a good metallurgical bonding between the Ni60 alloy and the 316L substrate is formed, and there exist complex hard phases distributed in the Ni60 coating. The mechanical properties of the two materials including the microhardness, the friction and wear, and the corrosion are tested. The results show that the Ni60 coating has superior performance than the 316L steel. Furthermore, using the particle swarm optimization method, the optimized process parameters for cladding Ni60 alloy coatings with a height of 2.5 mm and a width of 72 mm are obtained as follows: laser power is 1914 W, scanning speed is 3.00 mm/s, powder feeding rate is 0.17 g/s, track number is 32, and overlap rate is 47%. At last, the surface strengthening of a nonmagnetic cardan shaft is realized successfully.

Förderung

  • National Natural Science Foundation of China
  • Key Science and Technology Program of Shaanxi Province

Zitieren

APA

Liu, L., Guo, B., Qin, Y., Li, S., & Han, F. (2026). Dimension prediction, property analysis, and application of laser cladding Ni60 coating on 316L steel. Journal of Laser Applications, 38(4). https://doi.org/10.2351/7.0001896

Vancouver

Liu L, Guo B, Qin Y, Li S, Han F. Dimension prediction, property analysis, and application of laser cladding Ni60 coating on 316L steel. Journal of Laser Applications. 2026;38(4). doi:10.2351/7.0001896

BibTeX
@article{Liu2026,
  author = {Liu, Lilan and Guo, Boyu and Qin, Yingkai and Li, Sicong and Han, Feiyan},
  title = {Dimension prediction, property analysis, and application of laser cladding Ni60 coating on 316L steel},
  journal = {Journal of Laser Applications},
  year = {2026},
  volume = {38},
  number = {4},
  doi = {10.2351/7.0001896}
}
Kostenlos starten →