EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influences of Ultrasonic Vibrations on Laser Cladding Ni60/WC-TiO2+La2O3 Composite Coating

Xu Huang, Yanchun Chen, Jibin Jiang, Guofu Lian, Changrong Chen iD

Materials · 22.09.2023 · 16 (19) · 6356

DOI: 10.3390/ma16196356 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.09.2023. Verfasst von Xu Huang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Fujian Key Laboratory of Intelligent Machining Technology and Equipment, Fujian University of Technology, Fuzhou 350118, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fujian Province 2022 central government guiding local science and technology development projects, Fujian Provincial Science and Technology Innovation Key Project Funding, Innovative Research Team in Science and Technologe in Fujian Province University (IRTSTFJ).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The optimal process parameters of ultrasonic-assisted processing were studied to further improve the molding quality and mechanical properties of Ni60/WC-TiO2+La2O3 composite coating. A single-factor experiment was used to explore the influences of ultrasonic vibration frequencies on Ni60/WC-TiO2+La2O3 composite coating. The microstructure, elemental composition, phase composition, hardness, and wear resistance of the coating were studied using scanning electron microscopy (SEM), an X-ray diffractometer (XRD), an energy spectrometer, a microhardness meter, a friction and wear tester, and other equipment. Ultrasonic vibrations significantly improved the problems of pores in the coating, and the porosity was reduced from 0.13 to 0.014%. When the vibration frequency was 32 kHz in the experiment, the aspect ratio of the coating was optimized from 2.06 to 2.48, the dilution rate increased from 5.60 to 5.79%, the hardness increased from 960.25 to 988.45 HZ1.0, and the friction coefficient was reduced from 0.34 to 0.27. The coating performance was significantly improved, and the research results provide a reference for preparing excellent Ni60/WC-TiC+La2O3 composite coating.

Schlagwörter

Stichwörter der Autor:innen

cladded powderslaser claddingrare earth oxideultrasoundvibration frequency

Autor:innen und Institutionen

  • Fujian Key Laboratory of Intelligent Machining Technology and Equipment, Fujian University of Technology, Fuzhou 350118, China.
  • Department of Mechanics, School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou 350118, China.

ORCID-Profile: Changrong Chen

Förderung

  • Fujian Province 2022 central government guiding local science and technology development projects
  • Fujian Provincial Science and Technology Innovation Key Project Funding
  • Innovative Research Team in Science and Technologe in Fujian Province University (IRTSTFJ)

Zitieren

APA

Huang, X., Chen, Y., Jiang, J., Lian, G., & Chen, C. (2023). The Influences of Ultrasonic Vibrations on Laser Cladding Ni60/WC-TiO2+La2O3 Composite Coating. Materials, 16(19), 6356. https://doi.org/10.3390/ma16196356

Vancouver

Huang X, Chen Y, Jiang J, Lian G, Chen C. The Influences of Ultrasonic Vibrations on Laser Cladding Ni60/WC-TiO2+La2O3 Composite Coating. Materials. 2023;16(19):6356. doi:10.3390/ma16196356

BibTeX
@article{Huang2023,
  author = {Huang, Xu and Chen, Yanchun and Jiang, Jibin and Lian, Guofu and Chen, Changrong},
  title = {The Influences of Ultrasonic Vibrations on Laser Cladding Ni60/WC-TiO2+La2O3 Composite Coating},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {19},
  pages = {6356},
  doi = {10.3390/ma16196356}
}
Kostenlos starten →