EUVIMEDEUVIMED entdecken
Crossref

Remanufacturing oriented statistical optimization and performance analysis of laser cladding Ni60 coating on 316L piston rods

Lilan Liu, Fan Yang, Jiayi Wang, Shen Wang, Boyu Guo

Journal of Laser Applications · 01.08.2025 · 37 (3)

DOI: 10.2351/7.0001798 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 19.08.2025. Verfasst von Lilan Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to explore the remanufacturing of 316L piston rods, theoretical and experimental researches on laser cladding the Ni60 alloy on 316L stainless steel are conducted. A multiobjective optimization procedure is proposed to achieve appropriate process parameters based on the experimental results and the response surface method. The regression prediction models are built up to obtain the nonlinear relations between the main process parameters, as well as coating geometric dimensions and forming qualities. The laser power, scanning speed, powder feeding rate, and overlap rate are set as the input factors, and coating’s width, height, dilution rate, and hardness are set as the target responses. Through statistical analysis, the influences of the process parameters and their coupling effects on the geometric dimension and forming quality of Ni60 coatings are also studied. Then, process parameter optimization is conducted using the multiresponse desirability function method to laser cladding a given coating, and a verification experiment is carried out. Furthermore, the microstructure and mechanical performance of the Ni60 coating are investigated. The results show that there exists a dense metallurgical bonding between the substrate and the coating, and the microstructure of the coating is mainly composed of an austenite phase, a FeNi3 phase, and a (Cr, Fe)7C3 phase. The microhardness of the Ni60 coating is about three times that of 316L stainless steel, and its wear rate is significantly lower than that of 316L stainless steel. Finally, based on the optimized process parameters, repairing of the worn surface of a 316L piston rod is successfully realized.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, L., Yang, F., Wang, J., Wang, S., & Guo, B. (2025). Remanufacturing oriented statistical optimization and performance analysis of laser cladding Ni60 coating on 316L piston rods. Journal of Laser Applications, 37(3). https://doi.org/10.2351/7.0001798

Vancouver

Liu L, Yang F, Wang J, Wang S, Guo B. Remanufacturing oriented statistical optimization and performance analysis of laser cladding Ni60 coating on 316L piston rods. Journal of Laser Applications. 2025;37(3). doi:10.2351/7.0001798

BibTeX
@article{Liu2025,
  author = {Liu, Lilan and Yang, Fan and Wang, Jiayi and Wang, Shen and Guo, Boyu},
  title = {Remanufacturing oriented statistical optimization and performance analysis of laser cladding Ni60 coating on 316L piston rods},
  journal = {Journal of Laser Applications},
  year = {2025},
  volume = {37},
  number = {3},
  doi = {10.2351/7.0001798}
}
Kostenlos starten →