EUVIMEDEUVIMED entdecken
Crossref

Prediction modeling, process optimization, and property analysis of laser cladding Ni60 alloy on 56NiCrMoV7 steel

Lilan Liu, Fan Yang, Feiyan Han, Yingkai Qin, Ziying Wu

Journal of Laser Applications · 01.11.2024 · 36 (4)

DOI: 10.2351/7.0001663 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 18.11.2024. Verfasst von Lilan Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A theoretical and experimental study on laser cladding of Ni60 alloy on 56NiCrMoV7 steel is presented for remanufacturing of machine parts. Due to multiparameter and nonlinearity of the laser cladding process, it is a challenge for developing an accurate method to predict the geometry dimension and the forming quality of multitrack coatings. In this paper, the nonlinear relationships between the process parameters (laser power, powder feeding rate, scanning speed, and overlap rate) and the geometry dimensions (melt width and melt height) as well as the forming qualities (dilution rate and microhardness) of the Ni60 alloy coating are established using the response surface methodology. Statistical analysis gives the influences of each process parameter and their interaction effects on the geometry dimensions and forming qualities of coatings. Process optimizations are also carried out to acquire the desired coating. The verification experiments under optimized conditions are conducted, which indicates that the results obtained by the prediction models agree well with the actual values. Metallographic observation shows that the grain sizes of the microstructure in the coating are different at different zones. X-ray diffraction and scanning electron microscopy results display that the microstructure of the Ni60 coating is mainly composed of austenite phase and (Cr, Fe)7C3 phase. The microhardness of the Ni60 coating is about twice that of 56NiCrMoV7 steel, and the compressive strength of the material with Ni60 coating is higher than that of the 56NiCrMoV7 material. Finally, the practical application of the presented method for repairing the damaged surfaces of a hammer head is proceeded successfully.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, L., Yang, F., Han, F., Qin, Y., & Wu, Z. (2024). Prediction modeling, process optimization, and property analysis of laser cladding Ni60 alloy on 56NiCrMoV7 steel. Journal of Laser Applications, 36(4). https://doi.org/10.2351/7.0001663

Vancouver

Liu L, Yang F, Han F, Qin Y, Wu Z. Prediction modeling, process optimization, and property analysis of laser cladding Ni60 alloy on 56NiCrMoV7 steel. Journal of Laser Applications. 2024;36(4). doi:10.2351/7.0001663

BibTeX
@article{Liu2024,
  author = {Liu, Lilan and Yang, Fan and Han, Feiyan and Qin, Yingkai and Wu, Ziying},
  title = {Prediction modeling, process optimization, and property analysis of laser cladding Ni60 alloy on 56NiCrMoV7 steel},
  journal = {Journal of Laser Applications},
  year = {2024},
  volume = {36},
  number = {4},
  doi = {10.2351/7.0001663}
}
Kostenlos starten →