Cutting Surface Texture Evaluation of Plasma Arc on Hardox-450 Steel by Coherence Scanning
International Journal of Computational and Experimental Science and Engineering · 30.12.2024 · 10 (4)
DOI: 10.22399/ijcesen.772 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Computational and Experimental Science and Engineering, online erschienen am 30.12.2024. Verfasst von Sadık Olguner. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, the plasma arc cutting surfaces of hardox steel were measured by coherence scanning white light interferometry (WLI) and the cutting surface topographies was obtained. The correlograms obtained by coherence scanning was subjected to a series of filtering processes by following the procedure specified in ISO 25178-2 due to the presence of noise, surface form, waviness and roughness in the raw data obtained by scanning. In this way, noise and surface form were eliminated and areal surface roughness and flatness were successfully separated from each other. The kerf angle was also determined from the slope of the cutting surface. In this respect, this study can be considered as a guide for the evaluation of the cutting surface topography. In addition, the results obtained from the experiments carried out on materials with various thicknesses at different current levels show that higher cutting currents lead to improved surface flatness and reduced kerf angles, while cutting speed primarily affects surface roughness. These findings provide valuable insights into optimizing plasma arc cutting parameters for achieving better surface quality in high-strength materials.
Zitieren
APA
Olguner, S. (2024). Cutting Surface Texture Evaluation of Plasma Arc on Hardox-450 Steel by Coherence Scanning. International Journal of Computational and Experimental Science and Engineering, 10(4). https://doi.org/10.22399/ijcesen.772
Vancouver
Olguner S. Cutting Surface Texture Evaluation of Plasma Arc on Hardox-450 Steel by Coherence Scanning. International Journal of Computational and Experimental Science and Engineering. 2024;10(4). doi:10.22399/ijcesen.772
BibTeX
@article{Olguner2024,
author = {Olguner, Sadık},
title = {Cutting Surface Texture Evaluation of Plasma Arc on Hardox-450 Steel by Coherence Scanning},
journal = {International Journal of Computational and Experimental Science and Engineering},
year = {2024},
volume = {10},
number = {4},
doi = {10.22399/ijcesen.772}
}
EUVIMED