EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of High-Power Fiber Laser Cutting of Hardox 400 Steel: Process–Hardness Relationships and Thermal-Model Interpretation

Dorin-Ion Dumitrascu, Alexandru-Nicolae Rusu, Constantin Cristinel Gîrdu, Adela-Eliza Dumitrascu

Materials · 18.11.2026 · 19 (22) · 4873

DOI: 10.3390/ma19224873 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.11.2026. Verfasst von Dorin-Ion Dumitrascu und 3 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-power fiber laser cutting produces localized thermal cycles that influence the hardness of wear-resistant steels. This study investigates hardness variations in 10 mm Hardox 400 plate and uses thermal analysis to interpret the experimental response. A factorial design comprising the main conditions combined laser powers of 5100–5200 W, cutting speeds of 1150–1350 mm/min and focal positions from −8 to −6 mm. The measured hardness ranged from 26.5 to 50.9 HRC, with the maximum recorded at 5150 W, 1350 mm/min, and −7 mm. For selected conditions, measured heat-affected-zone widths of 150–260 µm were compared with numerical estimates, yielding a mean absolute error of 10 µm. The highest Rockwell hardness coincided with the widest measured heat-affected zone and the highest near-edge micro-hardness, decreasing from 520 HV to 385 HV (0.2 at 0.50 mm) from the edge. These observations support a spatial association between thermal exposure and hardness response. Thermal fields provide a qualitative interpretation of localized heating and cooling. Additionally, the quadratic model showed performance (R2 = 0.423; adjusted R2 = 0.117; Q2 = −0.244), supporting exploratory interpretation rather than validated process optimization.

Zitieren

APA

Dumitrascu, D., Rusu, A., Gîrdu, C. C., & Dumitrascu, A. (2026). Experimental Investigation of High-Power Fiber Laser Cutting of Hardox 400 Steel: Process–Hardness Relationships and Thermal-Model Interpretation. Materials, 19(22), 4873. https://doi.org/10.3390/ma19224873

Vancouver

Dumitrascu D, Rusu A, Gîrdu CC, Dumitrascu A. Experimental Investigation of High-Power Fiber Laser Cutting of Hardox 400 Steel: Process–Hardness Relationships and Thermal-Model Interpretation. Materials. 2026;19(22):4873. doi:10.3390/ma19224873

BibTeX
@article{Dumitrascu2026,
  author = {Dumitrascu, Dorin-Ion and Rusu, Alexandru-Nicolae and Gîrdu, Constantin Cristinel and Dumitrascu, Adela-Eliza},
  title = {Experimental Investigation of High-Power Fiber Laser Cutting of Hardox 400 Steel: Process–Hardness Relationships and Thermal-Model Interpretation},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4873},
  doi = {10.3390/ma19224873}
}
Kostenlos starten →