EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Modeling, Statistical Analysis, and Optimization of the Laser-Cutting Process of Hardox 400 Steel

Mehdi Safari iD, Seyed Mohammad Abtahi, Jalal Joudaki iD

Materials · 07.06.2024 · 17 (12) · 2798

DOI: 10.3390/ma17122798 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.06.2024. Verfasst von Mehdi Safari und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Arak University of Technology, Arak 38181-46763, Iran. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber laser cutting machines are widely used in industry for cutting various sheet metals. Hardox steel is widely used in the construction of machinery and equipment that are subjected to wear and impact due to its anti-wear properties and good impact resistance. In this experimental study, the effect of input parameters including laser output power (LOP), laser-cutting speed (LCS), and focal point position (FPP) of fiber laser on the surface roughness and kerf width of Hardox 400 steel sheets are studied. In addition, the optimization of input parameters to achieve the desired surface roughness and kerf width are investigated and analyzed using the response surface methodology (RSM). The experiments are performed using a 4 kW fiber laser-cutting machine and the output results including surface roughness and kerf width are measured using roughness meters and optical microscope. The results of the analysis of variance (ANOVA) for surface roughness and kerf width show that the FPP and LCS are the most significant process parameters affecting the surface roughness and kerf width. With a positive focal point, the surface roughness decreases while the kerf width increases. With increasing the laser-cutting speed, both the surface roughness and kerf width decrease.

Schlagwörter

Stichwörter der Autor:innen

Hardox 400 steeldesign of experimentskerf widthlaser-cutting processsurface roughness

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Arak University of Technology, Arak 38181-46763, Iran.

ORCID-Profile: Mehdi Safari, Jalal Joudaki

Zitieren

APA

Safari, M., Abtahi, S. M., & Joudaki, J. (2024). Experimental Modeling, Statistical Analysis, and Optimization of the Laser-Cutting Process of Hardox 400 Steel. Materials, 17(12), 2798. https://doi.org/10.3390/ma17122798

Vancouver

Safari M, Abtahi SM, Joudaki J. Experimental Modeling, Statistical Analysis, and Optimization of the Laser-Cutting Process of Hardox 400 Steel. Materials. 2024;17(12):2798. doi:10.3390/ma17122798

BibTeX
@article{Safari2024,
  author = {Safari, Mehdi and Abtahi, Seyed Mohammad and Joudaki, Jalal},
  title = {Experimental Modeling, Statistical Analysis, and Optimization of the Laser-Cutting Process of Hardox 400 Steel},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {12},
  pages = {2798},
  doi = {10.3390/ma17122798}
}
Kostenlos starten →