EUVIMEDEUVIMED entdecken
Crossref

Influence of titanium-base and universal abutment heights on the adaptation and fracture of screw-and-cemented-retained lithium disilicate crowns

Aline Cristina de Oliveira, Henrico Badaoui Strazzi-Sahyon, Ana Teresa Maluly-Proni, Ana Luiza de Marchi, Wirley Gonçalves Assunção, Paulo Henrique Dos Santos, Rogério Margonar

Journal of Prosthodontic Research · 2025

DOI: 10.2186/jpr.jpr_d_25_00065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2025. Verfasst von Aline Cristina de Oliveira und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Health Sciences, School of Dentistry, University of Araraquara, UNIARA, Araraquara, Sao Paulo, Brazil. Hauptthemen laut MEDLINE: Crowns, Dental Porcelain, Titanium, Dental Abutments. Die Arbeit nennt 38 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: This in vitro study evaluated the adaptation and fracture resistance of screw- and cement-retained implant-supported restorations using lithium disilicate crowns cemented onto titanium bases and universal abutments of different heights. METHODS: Thirty crowns were designed, milled, and divided into three groups: TBA (titanium base abutment - 4.7-mm-height and 4.65-mm-diameter), UA-4 (universal abutment - 4.0-mm-height and 4.5-mm-diameter), and UA-6 (universal abutment - 6.0-mm-height and 4.5-mm-diameter) (n=10). The abutments were placed in a mandibular first premolar model, torqued to 20 Ncm, and scanned using a digital intraoral scanner. The crowns were designed and fabricated using computer-aided design/computer-aided manufacturing technology. Adaptation was assessed using a stereomicroscope before and after ceramic sintering and after cementation with RelyX Ultimate resin cement. Fracture resistance was evaluated using a universal testing machine, and the failure modes were analyzed. The collected data were subjected to statistical analysis using one-way ANOVA and the Tukey least significant difference test (α=0.05). RESULTS: The abutment type influenced restoration adaptation and fracture resistance. No differences in adaptation were found before or after luting (P > 0.05). However, after sintering, the TBA group exhibited smaller marginal gaps than the UA-4 (P = 0.0339) and UA-6 (P = 0.0006) groups. TBA showed a higher fracture resistance than UA-4 (P = 0.0093); no differences were observed between TBA and UA-6 or between UA-4 and UA-6 (P > 0.05). The UA-4 and UA-6 groups showed higher ceramic fracture rates, whereas the TBA group showed increased abutment deformation and ceramic fractures. CONCLUSIONS: The type and height of abutments influenced the fracture of screw-and-cement-retained implant-supported restorations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CrownsDental PorcelainTitaniumDental AbutmentsDental Restoration FailureCementationDental Prosthesis, Implant-SupportedDental Marginal AdaptationDental Implant-Abutment DesignComputer-Aided DesignHumansDental Prosthesis DesignIn Vitro TechniquesDental Stress AnalysisMaterials Testing

Stichwörter der Autor:innen

CeramicDental implant-abutment designDental prosthesisProsthesis retentionTitanium base

Substanzen

lithia disilicateDental PorcelainTitanium

Autor:innen und Institutionen

  • Department of Health Sciences, School of Dentistry, University of Araraquara, UNIARA, Araraquara, Sao Paulo, Brazil.
  • Department of Prosthodontics and Periodontology, Bauru School of Dentistry, University of Sao Paulo - USP, Bauru, Brazil.
  • Division of Biomaterial and Biomedical Sciences, Department of Oral Rehabilitation and Biosciences, Oregon Health & Science University, OHSU, Portland, USA.
  • Department of Dental Materials and Prosthodontics, Araçatuba School of Dentistry, São Paulo State University - UNESP, Araçatuba, Brazil.
  • Restorative Dentistry Area, University of Toronto, Faculty of Dentistry, Toronto, Canada.

Zitieren

APA

de Oliveira, A. C., Strazzi-Sahyon, H. B., Maluly-Proni, A. T., de Marchi, A. L., Assunção, W. G., Dos Santos, P. H., & Margonar, R. (2025). Influence of titanium-base and universal abutment heights on the adaptation and fracture of screw-and-cemented-retained lithium disilicate crowns. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_25_00065

Vancouver

de Oliveira AC, Strazzi-Sahyon HB, Maluly-Proni AT, de Marchi AL, Assunção WG, Dos Santos PH, et al. Influence of titanium-base and universal abutment heights on the adaptation and fracture of screw-and-cemented-retained lithium disilicate crowns. Journal of Prosthodontic Research. 2025. doi:10.2186/jpr.jpr_d_25_00065

BibTeX
@article{deOliveira2025,
  author = {de Oliveira, Aline Cristina and Strazzi-Sahyon, Henrico Badaoui and Maluly-Proni, Ana Teresa and de Marchi, Ana Luiza and Assunção, Wirley Gonçalves and Dos Santos, Paulo Henrique and Margonar, Rogério},
  title = {Influence of titanium-base and universal abutment heights on the adaptation and fracture of screw-and-cemented-retained lithium disilicate crowns},
  journal = {Journal of Prosthodontic Research},
  year = {2025},
  doi = {10.2186/jpr.jpr_d_25_00065}
}
Kostenlos starten →