EUVIMEDEUVIMED entdecken
Crossref

Experimental analysis of the effects of different production directions on the mechanical characteristics of ABS, PLA, and PETG materials produced by FDM

Mehmet Umut Erdaş, Betül Sultan Yıldız, Ali Rıza Yıldız

Materials Testing · 26.02.2024 · 66 (2) · 198-206

DOI: 10.1515/mt-2023-0206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 09.01.2024. Verfasst von Mehmet Umut Erdaş und 2 weiteren Autor:innen. Die Arbeit wurde bisher 52-mal zitiert (Crossref) und nennt 72 Literaturangaben. Gefördert von: Bursa Uludağ University Scientific Research Projects Uni.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the most researched technologies among technologies used for producing complex and diverse parts today is additive manufacturing. In additive manufacturing, production can be carried out using thermoplastic and metal materials without requiring an additional process. Among the additive manufacturing technologies, the Fused Filament Fabrication (FFF) method is the most widely used method worldwide due to its affordability and broad application area. FFF is a method in which part formation is achieved by depositing melted materials on each other. In recent years, polymer materials such as polylactic acid (PLA), polyethylene terephthalate glycol (PETG), and acrylonitrile butadiene styrene (ABS) have been frequently used in many industrial areas in the FFF method because they are lightweight, inexpensive, sustainable, and provide sufficient strength for engineering applications. This study conducted tensile, three-point bending, Charpy, and compression tests on PLA, PETG, and ABS materials at angles of 15°–75° and 30°–60°, and the results were compared.

Förderung

  • Bursa Uludağ University Scientific Research Projects Uni

Zitieren

APA

Erdaş, M. U., Yıldız, B. S., & Yıldız, A. R. (2024). Experimental analysis of the effects of different production directions on the mechanical characteristics of ABS, PLA, and PETG materials produced by FDM. Materials Testing, 66(2), 198-206. https://doi.org/10.1515/mt-2023-0206

Vancouver

Erdaş MU, Yıldız BS, Yıldız AR. Experimental analysis of the effects of different production directions on the mechanical characteristics of ABS, PLA, and PETG materials produced by FDM. Materials Testing. 2024;66(2):198-206. doi:10.1515/mt-2023-0206

BibTeX
@article{Erda2024,
  author = {Erdaş, Mehmet Umut and Yıldız, Betül Sultan and Yıldız, Ali Rıza},
  title = {Experimental analysis of the effects of different production directions on the mechanical characteristics of ABS, PLA, and PETG materials produced by FDM},
  journal = {Materials Testing},
  year = {2024},
  volume = {66},
  number = {2},
  pages = {198--206},
  doi = {10.1515/mt-2023-0206}
}
Kostenlos starten →