EUVIMEDEUVIMED entdecken
Crossref

Experimental investigation of mechanical properties of PLA, ABS, and PETG 3-d printing materials using fused deposition modeling technique

Mehmet Kopar, Ali Riza Yildiz

Materials Testing · 15.12.2023 · 65 (12) · 1795-1804

DOI: 10.1515/mt-2023-0202 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 08.09.2023. Verfasst von Mehmet Kopar und 1 weiteren Autor:innen. Die Arbeit wurde bisher 66-mal zitiert (Crossref) und nennt 83 Literaturangaben. Gefördert von: Bursa Uludağ University Scientific Research Projects Unit.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, there has been a logarithmic interest in three-dimensional printing technologies. This technique has made it possible to make more intricately shaped parts of superior quality, allowing for use in a variety of industries, including aircraft, automobiles, and ships. This study characterized the materials and assessed the mechanical features of PLA, PETG, and ABS materials generated at various raster angles. The strength ratios of the various materials have been found to fluctuate when the raster angles change. The PLA parts created at a picture raster angle of 45° had the maximum tensile strength. ABS material created with a picture raster angle of 45° has been shown to have the best energy absorption, and PLA material made with a raster angle of 45° has the best performance compressive strength. When bending strength was evaluated, it was found that samples of ABS made with a raster angle of 0–90° had the greatest value. The SEM micrographs were obtained, and the tensile test was used to examine the fracture behavior of the materials. As a result, it has been found that materials created using various raster angles can have various strength values from one another.

Förderung

  • Bursa Uludağ University Scientific Research Projects Unit

Zitieren

APA

Kopar, M., & Yildiz, A. R. (2023). Experimental investigation of mechanical properties of PLA, ABS, and PETG 3-d printing materials using fused deposition modeling technique. Materials Testing, 65(12), 1795-1804. https://doi.org/10.1515/mt-2023-0202

Vancouver

Kopar M, Yildiz AR. Experimental investigation of mechanical properties of PLA, ABS, and PETG 3-d printing materials using fused deposition modeling technique. Materials Testing. 2023;65(12):1795-1804. doi:10.1515/mt-2023-0202

BibTeX
@article{Kopar2023,
  author = {Kopar, Mehmet and Yildiz, Ali Riza},
  title = {Experimental investigation of mechanical properties of PLA, ABS, and PETG 3-d printing materials using fused deposition modeling technique},
  journal = {Materials Testing},
  year = {2023},
  volume = {65},
  number = {12},
  pages = {1795--1804},
  doi = {10.1515/mt-2023-0202}
}
Kostenlos starten →