Effect of technological parameters on mechanical properties and microstructure of heat-assisted friction stir welded joints of 6061 aluminum alloy
PLOS One · 2025
DOI: 10.1371/journal.pone.0334979 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Hoang-Linh Nguyen und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, The University of Danang, University of Science and Technology, Danang City, Vietnam. Hauptthemen laut MEDLINE: Alloys, Aluminum, Welding. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The University of Danang, University of Science and Technology.
Abstract (Originalsprache)
This study investigates the influence of key technological parameters on the mechanical characteristics and microstructure of heat-assisted friction stir welded (FSW) joints of AA6061 aluminum alloy pipes. Specifically, the effect of tool rotation speed, transverse speed, and tool shoulder diameter was evaluated. An experimental campaign was conducted using a three-level, three-factor composite design, with the primary objective of determining the optimal combination of these parameters to maximize the tensile strength of the weldments. AA6061 aluminum alloy pipes, with a thickness of 5 mm and an outer diameter of 80 mm, were joined using a resistance preheating FSW (RPFSW) process. The input parameters were varied at three distinct levels: rotation speed (1250, 1500, 1750 rpm), transverse speed (75, 87.5, 100 mm/min), and shoulder diameter (12, 15, 18 mm). Tensile tests were conducted to evaluate mechanical strength, and optical microscopy together with scanning electron microscopy (SEM), was employed to examine the microstructure of the weldments. The results indicate that the weldments achieved a tensile strength ranging from 49.7% to 72.4% of the base material. The optimal processing parameters were identified to achieve the highest predicted tensile strength of 198.15 MPa, corresponding to a transverse speed of 100 mm/min, a rotation speed of 1629 rpm, and a shoulder diameter of 13 mm. Microstructural analysis revealed that appropriate RPFSW parameters lead to suitable temperature and material flow, which in turn reduces weld defects and enhances the overall mechanical properties of the joint.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, The University of Danang, University of Science and Technology, Danang City, Vietnam.
- Department of Mechanical Engineering, Pham Van Dong University, Quang Ngai Province, Vietnam.
- Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology (HCMUT), Ho Chi Minh City, Vietnam.
- Vietnam National University Ho Chi Minh City, Linh Trung Ward, Thu Duc City, Ho Chi Minh City, Vietnam.
ORCID-Profile: Hoang-Linh Nguyen, Van-Trung Pham
Förderung
- The University of Danang, University of Science and Technology
Zitieren
APA
Nguyen, H. L., Pham, V. T., Luu, D. B., & Tran, T. P. (2025). Effect of technological parameters on mechanical properties and microstructure of heat-assisted friction stir welded joints of 6061 aluminum alloy. PLOS One. https://doi.org/10.1371/journal.pone.0334979
Vancouver
Nguyen HL, Pham VT, Luu DB, Tran TP. Effect of technological parameters on mechanical properties and microstructure of heat-assisted friction stir welded joints of 6061 aluminum alloy. PLOS One. 2025. doi:10.1371/journal.pone.0334979
BibTeX
@article{Nguyen2025,
author = {Nguyen, Hoang-Linh and Pham, Van-Trung and Luu, Duc-Binh and Tran, Thien-Phuc},
title = {Effect of technological parameters on mechanical properties and microstructure of heat-assisted friction stir welded joints of 6061 aluminum alloy},
journal = {PLOS One},
year = {2025},
doi = {10.1371/journal.pone.0334979}
}
EUVIMED