EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-objective optimization of wear parameters of hybrid composites (LM6/B4C/fly ash) using grey relational analysis

Charles Sarala Rubi, Jayavelu Udaya Prakash iD, Sunder Jebarose Juliyana, Sachin Salunkhe iD, Robert Cep iD, Emad Abouel Nasr

PLOS One · 26.06.2025 · 20 (6) · e0326086

DOI: 10.1371/journal.pone.0326086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 26.06.2025. Verfasst von Charles Sarala Rubi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India. Hauptthemen laut MEDLINE: Coal Ash, Materials Testing, Aluminum. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Aluminium based composites with hybrid reinforcement hold significant potential to replace Al-alloys in a variety of automotive sectors where cheap cost, a significant ratio of strength to weight, and better wear resistance are required.

Methods

Stir casting was utilized to make aluminium matrix composites (AMCs) with 3%, 6%, and 9% of B 4 C/Fly ash particles. The wear was examined with various Sliding Speed, S (1 m/s, 1.5 m/s and 2 m/s), Sliding Distance, D (500 m, 1000 m and 1500 m), applied load, L (15 N, 30N and 45 N) and reinforcement %, R (3, 6 and 9%). Grey Relational Analysis was used to optimise the wear variables. Taguchi’s L 27 Orthogonal array (OA) was selected for this statistical approach in order to analyse responses like Specific wear rate (SWR) and Coefficient of Friction (CoF). Furthermore, analysis of variance (ANOVA) was utilized to investigate the influence of input parameters on wear behavior by choosing “smaller is better” feature.

Results

Based on this study, the optimal values of S – 1.5 m/s, D – 500 m, L – 30 N, and R% – 9 wt% Hybrid (4.5% Fly ash and 4.5% B 4 C) are found to yield the lowest SWR and CoF. Wear rate of composite decreased with an increase in reinforcement particles. Increase in hardness was also the reason for decrease in wear rate. The responses have a narrow margin of error, according to confirmation studies. There exists a good agreement between them.

Discussion

The research on LM6/B 4 C/fly ash composite fabrication using Grey Relational Analysis (GRA) has significantly contributed to the development of high-performance materials for wear-related applications. Through the optimization of wear parameters, GRA allows for the improvement of wear resistance, strength, and sustainability.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Coal AshMaterials TestingAluminumFrictionAlloys

Substanzen

Coal AshAluminumAlloys

Autor:innen und Institutionen

  • Department of Physics, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India.
  • Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India.
  • Department of Biosciences, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, India.
  • Faculty of Engineering, Department of Mechanical Engineering, Gazi University, Ankara, Turkey.
  • Department of Machining, Assembly and Engineering Metrology, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, Ostrava, Czech Republic.
  • Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia.

ORCID-Profile: Jayavelu Udaya Prakash, Sachin Salunkhe, Robert Cep

Förderung

  • King Saud University

Zitieren

APA

Rubi, C. S., Prakash, J. U., Juliyana, S. J., Salunkhe, S., Cep, R., & Nasr, E. A. (2025). Multi-objective optimization of wear parameters of hybrid composites (LM6/B4C/fly ash) using grey relational analysis. PLOS One, 20(6), e0326086. https://doi.org/10.1371/journal.pone.0326086

Vancouver

Rubi CS, Prakash JU, Juliyana SJ, Salunkhe S, Cep R, Nasr EA. Multi-objective optimization of wear parameters of hybrid composites (LM6/B4C/fly ash) using grey relational analysis. PLOS One. 2025;20(6):e0326086. doi:10.1371/journal.pone.0326086

BibTeX
@article{Rubi2025,
  author = {Rubi, Charles Sarala and Prakash, Jayavelu Udaya and Juliyana, Sunder Jebarose and Salunkhe, Sachin and Cep, Robert and Nasr, Emad Abouel},
  title = {Multi-objective optimization of wear parameters of hybrid composites (LM6/B4C/fly ash) using grey relational analysis},
  journal = {PLOS One},
  year = {2025},
  volume = {20},
  number = {6},
  pages = {e0326086},
  doi = {10.1371/journal.pone.0326086}
}
Kostenlos starten →