EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of interface characteristics and mechanical performances of Cu/Al plate fabricated by underwater explosive welding method

Jinhua Chen, Dapeng Zhou, Xiaohong Zhou, Hanliang Liang, Peizhong Feng, Yonghao Yu, Xueqin Kang iD

PLOS ONE · 2025

DOI: 10.1371/journal.pone.0320970 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2025. Verfasst von Jinhua Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Huaibei Blasting Technology Research Institute Limited Company, China Coal Technology Engineering Group, Huaibei, China. Hauptthemen laut MEDLINE: Copper, Aluminum, Welding. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu/Al composite plate was manufactured by underwater explosive welding method. The interface characteristics and mechanical properties of Cu/Al composite plate were evaluated and analyzed through phased array ultrasonic inspection, microstructure, uniaxial tensile test, three-point bending test, tensile shearing test and microhardness test. The results showed that the welding of thin Cu and Al plates is achieved by underwater explosive welding, with a Cu plate thickness of only 0.5 mm. A well bonded interface between Cu and Al plate is obtained, at a detonation velocity of 4 000 m/s, when the distance between Cu foil and Al plate is 0.2 mm. There are wavy fusion zones at the bonding interface of Cu/Al composite plate. No delamination or cracks are found at the bonding interface between Cu and Al during tensile and bending tests, and local cracking only occurs at the necking part in the tensile test due to severe deformation. The tensile strength and minimum tensile shearing strength of Cu/Al composite plate reaches 133 and 72.9 MPa, respectively. The hardness values of fusion zone, Cu and Al at the interface reach 385, 135 and 52 HV, respectively. The increase in hardness of Cu and Al near the interface is mainly caused by severed deformation induced by intense shock pressure.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CopperAluminumWeldingTensile StrengthMaterials TestingHardnessWater

Substanzen

CopperAluminumWater

Autor:innen und Institutionen

  • Huaibei Blasting Technology Research Institute Limited Company, China Coal Technology Engineering Group, Huaibei, China.
  • Anhui Key Laboratory of Explosive Energy Utilization and Control, Huaibei, China.
  • School of Materials Science and Physics, China University of Mining and Technology, Xuzhou, China.

ORCID-Profile: Xueqin Kang

Zitieren

APA

Chen, J., Zhou, D., Zhou, X., Liang, H., Feng, P., Yu, Y., & Kang, X. (2025). Investigation of interface characteristics and mechanical performances of Cu/Al plate fabricated by underwater explosive welding method. PLOS ONE. https://doi.org/10.1371/journal.pone.0320970

Vancouver

Chen J, Zhou D, Zhou X, Liang H, Feng P, Yu Y, et al. Investigation of interface characteristics and mechanical performances of Cu/Al plate fabricated by underwater explosive welding method. PLOS ONE. 2025. doi:10.1371/journal.pone.0320970

BibTeX
@article{Chen2025,
  author = {Chen, Jinhua and Zhou, Dapeng and Zhou, Xiaohong and Liang, Hanliang and Feng, Peizhong and Yu, Yonghao and Kang, Xueqin},
  title = {Investigation of interface characteristics and mechanical performances of Cu/Al plate fabricated by underwater explosive welding method},
  journal = {PLOS ONE},
  year = {2025},
  doi = {10.1371/journal.pone.0320970}
}
Kostenlos starten →