EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of wear behaviour and surface analysis of a coated H13 material for friction drilling application

Saravanan Balakrishnan, Selvakumar Subbaiah, Mathew Alphonse iD, Robert Čep, Sachin Salunkhe iD, Emad Abouel Nasr

PLOS One · 22.08.2025 · 20 (8) · e0328168

DOI: 10.1371/journal.pone.0328168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 22.08.2025. Verfasst von Saravanan Balakrishnan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Sri Ramakrishna College of Engineering, Perambalur, Tamil Nadu, India. Hauptthemen laut MEDLINE: Friction, Steel, Materials Testing. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, industries have seen many advancements in finding proper tools for machining to enhance productivity. Choosing a proper friction drilling tool that minimizes surface damage and improves tool life and productivity is essential. In this study, the wear characteristics of H13 steel among four samples (untreated, heated, TiAlN, and AlCrN) were investigated through a pin-on-disc machine, focusing on highlighting the wear behaviour and surface morphology. The novelty of this study is to analyze an optimal friction drilling tool that can enhance its life. The tempering process was carried out to improve the hardness of the H13 steel tool from 37 HRC to 57 HRC. During the wear test process, the temperature is maintained at 250°C. Using an Atomic Force Microscope (AFM), the worn surface of the samples was analyzed. Among the four samples (untreated, heated, TiAlN, and AlCrN), the untreated samples were affected by adhesive wear and oxidation. It is observed that the tempering helps the coated H13 samples to appear wear-resistant; the material loss obtained for the coated samples is much less compared to the uncoated samples. The untreated and heated sample CoF values observed are 0.713 and 0.591; for TiAlN and AlCrN, the CoF values observed are 0.481 and 0.416. This study reveals that AlCrN Coated H13 steel exhibited the best wear response. Hence, it is suitable for Friction drilling applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

FrictionSteelMaterials TestingSurface PropertiesMicroscopy, Atomic ForceHardness

Substanzen

Steel

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Sri Ramakrishna College of Engineering, Perambalur, Tamil Nadu, India.
  • Department of Mechanical Engineering, M.A.M School of Engineering, Siruganur, Tiruchirappalli, Tamil Nadu, India.
  • Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, India.
  • Department of Machining, Assembly and Engineering Metrology, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, Ostrava, Czech Republic.
  • Department of Biosciences, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, India.
  • Department of Mechanical Engineering, Gazi University Faculty of Engineering, Ankara, Turkey.

ORCID-Profile: Mathew Alphonse, Sachin Salunkhe

Förderung

  • King Saud University

Zitieren

APA

Balakrishnan, S., Subbaiah, S., Alphonse, M., Čep, R., Salunkhe, S., & Nasr, E. A. (2025). Investigation of wear behaviour and surface analysis of a coated H13 material for friction drilling application. PLOS One, 20(8), e0328168. https://doi.org/10.1371/journal.pone.0328168

Vancouver

Balakrishnan S, Subbaiah S, Alphonse M, Čep R, Salunkhe S, Nasr EA. Investigation of wear behaviour and surface analysis of a coated H13 material for friction drilling application. PLOS One. 2025;20(8):e0328168. doi:10.1371/journal.pone.0328168

BibTeX
@article{Balakrishnan2025,
  author = {Balakrishnan, Saravanan and Subbaiah, Selvakumar and Alphonse, Mathew and Čep, Robert and Salunkhe, Sachin and Nasr, Emad Abouel},
  title = {Investigation of wear behaviour and surface analysis of a coated H13 material for friction drilling application},
  journal = {PLOS One},
  year = {2025},
  volume = {20},
  number = {8},
  pages = {e0328168},
  doi = {10.1371/journal.pone.0328168}
}
Kostenlos starten →