Microstructure and performance of laser cladding 17-4PH-xTiC coatings on harvester blades
PLOS One · 2025
DOI: 10.1371/journal.pone.0336947 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Dian Yu Luo und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Vehicle Engineering, Bengbu University, Bengbu, China. Hauptthemen laut MEDLINE: Lasers, Titanium, Alloys. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The University Synergy Innovation Program of Anhui Province, The Anhui Provincial Natural Science Foundation in Universities, The Discipline (Major) Leadership Development Program of Anhui Province.
Abstract (Originalsprache)
To address the need for extending the service life of combine harvester blades, this study employs laser cladding technology to prepare 17–4PH-xTiC coatings with varying TiC content on 65Mn steel substrates. The effect of TiC content on the microstructure and properties of the coatings was investigated. Specifically, the microstructure of the coatings was observed by scanning electron microscopy and optical microscopy. X-ray diffraction was used to analyze the phase composition, a Vickers hardness tester measured the hardness, and a friction and wear testing machine evaluated the wear resistance. The coating composition with the optimal performance was selected to prepare reinforced coatings on the surface of harvester blades, followed by field tests. Results indicated that when the TiC content in the coating reached 40%, cracks appeared on the surface, and the number of cracks gradually decreased as laser cladding progressed. The cross-sectional microstructure of the coatings mainly featured columnar crystals, columnar dendrites, cell crystals, and unmelted TiC particles. The proportion of secondary precipitated fishbone-like TiC particles also increased, refining the microstructure. The coatings primarily consisted of α-Fe, TiC, γ-Fe, and Cr 23 C 6 . The average hardness of the 17–4PH-xTiC coatings ranged from 359 HV 0.2 to 556 HV 0.2 . Under room temperature conditions, the primary wear mechanisms of the coatings were oxidative wear and adhesive wear. The wear loss of the 10–40% TiC coatings was reduced by 44.1% to 68.1%, respectively, compared to the substrate (65Mn). Field tests showed that the laser-cladded blades maintained a relatively sharp edge even after harvesting wheat for 120 h, whereas the commercially available heat-treated blades had completely failed. Compared to the commercial blade, the wear of the laser-cladded blade was decreased by 67%. This study successfully applied wear-resistant laser cladding coatings on the surface of harvester blades with small substrate thickness, significantly extending their service life.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- College of Mechanical and Vehicle Engineering, Bengbu University, Bengbu, China.
- College of Intelligent Manufacturing, Anhui Science and Technology University, Chuzhou, China.
- Anhui Province Additive Manufacturing Engineering Research Center, Bengbu, China.
- School of Ruian, Wenzhou Polytechnic, Wenzhou, China.
- Anhui Yucheng Laser Technology Co. Ltd., Bengbu, China.
ORCID-Profile: Dian Yu Luo
Förderung
- The University Synergy Innovation Program of Anhui Province
- The Anhui Provincial Natural Science Foundation in Universities
- The Discipline (Major) Leadership Development Program of Anhui Province
- The Science and Technology Planning Project of Bengbu
- The Bengbu University application-oriented project of China
Zitieren
APA
Luo, D. Y., Liu, C., Wei, T., Wang, C., Ma, H., & Jiang, S. (2025). Microstructure and performance of laser cladding 17-4PH-xTiC coatings on harvester blades. PLOS One. https://doi.org/10.1371/journal.pone.0336947
Vancouver
Luo DY, Liu C, Wei T, Wang C, Ma H, Jiang S. Microstructure and performance of laser cladding 17-4PH-xTiC coatings on harvester blades. PLOS One. 2025. doi:10.1371/journal.pone.0336947
BibTeX
@article{Luo2025,
author = {Luo, Dian Yu and Liu, Chunjing and Wei, Tianlu and Wang, Chao and Ma, Hairui and Jiang, Shichun},
title = {Microstructure and performance of laser cladding 17-4PH-xTiC coatings on harvester blades},
journal = {PLOS One},
year = {2025},
doi = {10.1371/journal.pone.0336947}
}
EUVIMED