EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the effects of the shot peening intensity on the microstructure, friction and wear properties of high-strength steel

Huashen Guan, Junjie Zhang, Xiaoguang Zhang, Guofu Sun, Chenfeng Duan iD

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0314561 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Huashen Guan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Jiangmen Power Supply Bureau of Guangdong Power Grid Co. Ltd., Jiangmen, Guangdong, China. Hauptthemen laut MEDLINE: Steel, Friction, Materials Testing. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: South China Power Grid Company Science and Technology Project Funding, Natural Science Foundation of Guangdong.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The microstructure, hardness, residual stress, and friction and wear properties of 25CrNi2MoV steel with different particle diameters during shot peening strengthening were studied. Studies have shown that a grain refinement layer appeared on the surface of the material after shot peening. The shot peening intensity increased with increasing particle diameter; a greater shot peening intensity corresponded to a greater surface hardness of the material, the maximum hardness was 592 HV 0.2 , and the residual compressive stress on the material surface was 725 MPa. A shot peening finite element model was established to accurately predict the residual stresses in the samples after shot peening. The prediction errors were 1.4–7.9%. The finite element model indicates that the maximum residual stress occurs in the subsurface layer. After shot peening, the wear resistance of the sample significantly improved, and the amount of wear significantly decreased. Therefore, shot peening can significantly improve the mechanical properties and wear resistance of high-strength steel, which increases the service life of parts.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SteelFrictionMaterials TestingHardnessStress, MechanicalSurface PropertiesFinite Element Analysis

Substanzen

Steel

Autor:innen und Institutionen

  • Jiangmen Power Supply Bureau of Guangdong Power Grid Co. Ltd., Jiangmen, Guangdong, China.
  • School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, China.

ORCID-Profile: Chenfeng Duan

Förderung

  • South China Power Grid Company Science and Technology Project Funding
  • Natural Science Foundation of Guangdong

Zitieren

APA

Guan, H., Zhang, J., Zhang, X., Sun, G., & Duan, C. (2024). Study on the effects of the shot peening intensity on the microstructure, friction and wear properties of high-strength steel. PLOS ONE. https://doi.org/10.1371/journal.pone.0314561

Vancouver

Guan H, Zhang J, Zhang X, Sun G, Duan C. Study on the effects of the shot peening intensity on the microstructure, friction and wear properties of high-strength steel. PLOS ONE. 2024. doi:10.1371/journal.pone.0314561

BibTeX
@article{Guan2024,
  author = {Guan, Huashen and Zhang, Junjie and Zhang, Xiaoguang and Sun, Guofu and Duan, Chenfeng},
  title = {Study on the effects of the shot peening intensity on the microstructure, friction and wear properties of high-strength steel},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0314561}
}
Kostenlos starten →