EUVIMEDEUVIMED entdecken
Open Access · CC0

Influence of shot peening on the microstructure and friction-wear performance of CF53 steel

Qiushen Cai, Huashen Guan, Junjie Zhang, Xiaoguang Zhang, Chenfeng Duan iD

PLOS One · 2025

DOI: 10.1371/journal.pone.0317410 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Qiushen Cai und 4 weiteren Autor:innen. Beteiligte Einrichtung: Jiangmen Power Supply Bureau of Guangdong Power Grid Co. Ltd., Jiangmen, Guangdong, China. Hauptthemen laut MEDLINE: Steel. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC0). Gefördert von: the Natural Science Foundation of Guangdong, South China Power Grid Company Science and Technology Project Funding.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to further enhance the wear resistance of the camshaft surface, this study conducted shot peening reinforcement on CF53 steel. The research involves the analysis of microstructure, microhardness, and residual stress evolution. Additionally, a pin-on-disk friction and wear test machine was used to investigate the influence of shot peening on the friction-wear characteristics of CF53 steel. The results show that a certain depth of plastic deformation layer is formed on the surface after shot peening, accompanied by an increase in surface roughness. With the increase of shot peening pressure, the surface roughness, microhardness, and residual stress values of the samples correspondingly increase. Shot peening treatment significantly improves the friction-wear performance of CF53 steel, with a reduction of 22.5% and 54.6% in the friction coefficient and wear rate for SP3 and SP4 groups, respectively, compared to untreated samples. The wear mechanism of untreated samples is characterized by severe fatigue wear with prominent features of plowing grooves and cracks. In contrast, the wear mechanism of peened samples shifts to fatigue wear dominated by delamination.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SteelFrictionSurface PropertiesMaterials TestingHardnessStress, Mechanical

Substanzen

Steel

Autor:innen und Institutionen

  • Jiangmen Power Supply Bureau of Guangdong Power Grid Co. Ltd., Jiangmen, Guangdong, China.
  • School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, China.

ORCID-Profile: Chenfeng Duan

Förderung

  • the Natural Science Foundation of Guangdong
  • South China Power Grid Company Science and Technology Project Funding

Zitieren

APA

Cai, Q., Guan, H., Zhang, J., Zhang, X., & Duan, C. (2025). Influence of shot peening on the microstructure and friction-wear performance of CF53 steel. PLOS One. https://doi.org/10.1371/journal.pone.0317410

Vancouver

Cai Q, Guan H, Zhang J, Zhang X, Duan C. Influence of shot peening on the microstructure and friction-wear performance of CF53 steel. PLOS One. 2025. doi:10.1371/journal.pone.0317410

BibTeX
@article{Cai2025,
  author = {Cai, Qiushen and Guan, Huashen and Zhang, Junjie and Zhang, Xiaoguang and Duan, Chenfeng},
  title = {Influence of shot peening on the microstructure and friction-wear performance of CF53 steel},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0317410}
}
Kostenlos starten →