EUVIMEDEUVIMED entdecken
Crossref

Effects of temperature and strain-rate histories on the compression behavior of 3D printed PLA

Ramzi Othman

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 30.10.2026

DOI: 10.1177/14644207261501529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 30.10.2026. Verfasst von Ramzi Othman. Die Arbeit nennt 38 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polylactic acid (PLA) specimens, 3D-printed by fused filament fabrication (FFF), were tested in compression using four distinct protocols: constant engineering strain rate (Type 1), step-wise strain rate (Type 2), interrupted constant strain rate (Type 3), and interrupted step-wise strain rate (Type 4), covering strain rates from 10 −4 to 10 −1 s −1 . Step-wise loading produces stress overshoots of up to +58% and an undershoot of −37% relative to the constant-rate reference. Interrupted loading alone, without any rate change, reproduces the same overshoot pattern, with magnitudes increasing from 9–10% at 10 −4 s −1 to 32–64% at 10 −1 s −1 , consistent with greater specimen self-heating at higher rates. When the thermal history is matched, using interrupted step-wise and interrupted constant-rate tests, the overshoot collapses to within 3% at every strain-rate transition. These results indicate that the thermomechanical history is an important parameter in the strain-rate history dependence of FFF-printed PLA in compression, with direct implications for the constitutive modeling of this material.

Zitieren

APA

Othman, R. (2026). Effects of temperature and strain-rate histories on the compression behavior of 3D printed PLA. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261501529

Vancouver

Othman R. Effects of temperature and strain-rate histories on the compression behavior of 3D printed PLA. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261501529

BibTeX
@article{Othman2026,
  author = {Othman, Ramzi},
  title = {Effects of temperature and strain-rate histories on the compression behavior of 3D printed PLA},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
  year = {2026},
  doi = {10.1177/14644207261501529}
}
Kostenlos starten →