Bending and compression behavior of 3-D printed PLA sandwich panels
Materials Testing · 24.07.2026 · 68 (7) · 1155-1171
DOI: 10.1515/mt-2026-0036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Testing, online erschienen am 20.05.2026. Verfasst von Seçil Ekşi und 4 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the bending and compression behaviors of FDM-fabricated polylactic acid (PLA) corrugated sandwich panels with symmetrical Y-shaped cores through combined experimental testing and finite element analysis (FEA). Core geometries with varying cell angles (60°, 75°, 90°), mid-lengths (2–10 mm), and cell numbers were systematically examined. Experimental results demonstrate that core angle and mid-length strongly govern bending stiffness, load capacity, and energy absorption, while compression performance is dominated by core stability and progressive crushing behavior. In three-point bending, the 60° core angle panel achieved the highest load capacity (1609 N) and specific energy absorption (0.14 J g −1 ), while increasing mid-length from 2 mm to 10 mm reduced strength by ≈23 %. Under compression, the specimen with a 60° core angle, 6 mm mid-length, and 4-cell configuration exhibited the maximum load capacity (16,953 N) and specific energy absorption (2.23 J g −1 ), outperforming other designs. Finite element simulations capture the global load–displacement response and dominant deformation patterns with deviations below 7 % in peak load. The novelty of this work lies in the coupled experimental–numerical evaluation of bending and compression behaviors within a unified geometric design space, revealing clear trade-offs between stiffness, strength, and energy absorption in FDM-fabricated PLA corrugated sandwich panels.
Zitieren
APA
Ekşi, S., Aslan, Ç., Acar, M., Yılmaz, E. İ., & Uzun, B. (2026). Bending and compression behavior of 3-D printed PLA sandwich panels. Materials Testing, 68(7), 1155-1171. https://doi.org/10.1515/mt-2026-0036
Vancouver
Ekşi S, Aslan Ç, Acar M, Yılmaz Eİ, Uzun B. Bending and compression behavior of 3-D printed PLA sandwich panels. Materials Testing. 2026;68(7):1155-1171. doi:10.1515/mt-2026-0036
BibTeX
@article{Eki2026,
author = {Ekşi, Seçil and Aslan, Çağdaş and Acar, Melisa and Yılmaz, Erva İrem and Uzun, Beyza},
title = {Bending and compression behavior of 3-D printed PLA sandwich panels},
journal = {Materials Testing},
year = {2026},
volume = {68},
number = {7},
pages = {1155--1171},
doi = {10.1515/mt-2026-0036}
}
EUVIMED