EUVIMEDEUVIMED entdecken
Crossref

Comparative study of ultrasonic vibration and conventional cutting of Ti4822 titanium alloy: Cutting performance, chip morphology, and surface quality

Donggang Li, Zhongwen Li, Yuqing Peng, Sinan Liu, Fuhao Li, Qingchun Li

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 09.06.2026

DOI: 10.1177/09544089261458169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 09.06.2026. Verfasst von Donggang Li und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Natural Science Foundation of Tianjin Municipality.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A Ti–48Al–2Cr–2Nb (Ti4822) titanium alloy holds great potential for aerospace engine applications, but still faces challenges in safe large-scale production and high processing difficulty. This study employs a one-step in-furnace self-propagating high-temperature synthesis technique for material preparation, overcoming the inherent intense explosive reactions in traditional methods. This approach enables safe continuous production of kilogram-scale γ-TiAl alloys, providing a high-quality material foundation for subsequent processing. This work conducted a study on the effects of ultrasonic vibration-assisted cutting (UC) and conventional cutting on Ti4822 alloy machinability, chip morphology, and surface quality. For the first time, an online observation method of digital image correlation (DIC) was utilized to reveal the strain distribution pattern under ultrasonic vibration, and the weight of the influence of process factors on the processing quality was provided through gray correlation analysis. Observations and quantitative analysis indicate that UC can reduce cutting force by up to 11.91%; DIC dynamic full-field strain shows a maximum Y -direction strain reduction of 53.04%, significantly alleviating stress concentration; chips transition from large fragments to fine, short strips, ensuring smooth chip evacuation without accumulation; and surface roughness is reduced by up to 54.77%, with a surface damage area decreasing by 20.9%. Independent samples t tests confirmed statistical significance. Gray relational analysis ranked the influence weights on machining performance, and UC exhibits a significant positive synergistic effect with a 20° large rake angle tool. These findings provide theoretical support for the efficient and precision machining of this alloy.

Förderung

  • Natural Science Foundation of Tianjin Municipality

Zitieren

APA

Li, D., Li, Z., Peng, Y., Liu, S., Li, F., & Li, Q. (2026). Comparative study of ultrasonic vibration and conventional cutting of Ti4822 titanium alloy: Cutting performance, chip morphology, and surface quality. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261458169

Vancouver

Li D, Li Z, Peng Y, Liu S, Li F, Li Q. Comparative study of ultrasonic vibration and conventional cutting of Ti4822 titanium alloy: Cutting performance, chip morphology, and surface quality. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261458169

BibTeX
@article{Li2026,
  author = {Li, Donggang and Li, Zhongwen and Peng, Yuqing and Liu, Sinan and Li, Fuhao and Li, Qingchun},
  title = {Comparative study of ultrasonic vibration and conventional cutting of Ti4822 titanium alloy: Cutting performance, chip morphology, and surface quality},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261458169}
}
Kostenlos starten →