Ultrasonic vibration assisted cutting of titanium alloy: Machining mechanism and parameter optimization
AIP Advances · 01.08.2026 · 16 (8)
DOI: 10.1063/5.0348734 ↗Kurz gefasst
Fachartikel in der Zeitschrift AIP Advances, online erschienen am 21.08.2026. Verfasst von Wen Cheng und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key R&D Program of Shaanxi Province, Industrialization Cultivation Project of Shaanxi Province.
Abstract (Originalsprache)
Titanium alloys are widely used in aerospace and other fields owing to their excellent mechanical properties, yet they exhibit poor machinability. Ultrasonic Vibration Assisted Cutting (UVAC) technology can significantly improve the machinability of titanium alloys by introducing high-frequency vibration. In this paper, a three-dimensional finite element cutting model of TC4 titanium alloy is established based on the ABAQUS platform. The simulation accuracy is improved by developing a VUMAT subroutine that incorporates Young’s modulus and Poisson’s ratio as temperature-dependent functions. The effects of ultrasonic amplitude, ultrasonic frequency, cutting speed, feed rate, and cutting depth on cutting force, cutting temperature, chip morphology, residual stress, and surface roughness are systematically investigated. The results show that UVAC can effectively reduce cutting force and cutting temperature, with a maximum reduction of 29.8% in cutting temperature. As the ultrasonic amplitude increases, the chip length decreases from 1.221 to 0.306 cm, indicating significantly enhanced chip breaking performance. The surface roughness first decreases and then increases with increasing amplitude, with an optimal amplitude range of 5–18.56 μm. A surface roughness prediction model is established based on orthogonal experiments, and the optimal cutting parameter ranges are determined as a cutting speed of 36–40 m/min, a feed rate of 0.06–0.09 mm/r, and a cutting depth of 0.4–0.6 mm. This study provides a theoretical basis for process optimization of ultrasonic vibration assisted cutting of titanium alloys.
Förderung
- National Natural Science Foundation of China
- Key R&D Program of Shaanxi Province
- Industrialization Cultivation Project of Shaanxi Province
- Xi’an Aeronautical Polytechic Institude Strat-up Fund Project
Zitieren
APA
Cheng, W., Cao, Y., Dou, W., & Wang, A. (2026). Ultrasonic vibration assisted cutting of titanium alloy: Machining mechanism and parameter optimization. AIP Advances, 16(8). https://doi.org/10.1063/5.0348734
Vancouver
Cheng W, Cao Y, Dou W, Wang A. Ultrasonic vibration assisted cutting of titanium alloy: Machining mechanism and parameter optimization. AIP Advances. 2026;16(8). doi:10.1063/5.0348734
BibTeX
@article{Cheng2026,
author = {Cheng, Wen and Cao, Yan and Dou, Weitao and Wang, Along},
title = {Ultrasonic vibration assisted cutting of titanium alloy: Machining mechanism and parameter optimization},
journal = {AIP Advances},
year = {2026},
volume = {16},
number = {8},
doi = {10.1063/5.0348734}
}
EUVIMED