EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation on Cutting Characteristics and Surface Quality of TC18 Titanium Alloy in Longitudinal Ultrasonic-Vibration-Assisted Milling Under Dry Conditions

Xiangyou Xue, Dongyan Shi, Biao Liu, Renjie Huang

Micromachines · 23.06.2026 · 17 (7) · 761

DOI: 10.3390/mi17070761 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.06.2026. Verfasst von Xiangyou Xue und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a systematic investigation on dry milling of TC18 forged alloy using longitudinal ultrasonic vibration assistance. The effects of key parameters (cutting speed, feed per tooth, cutting depth and ultrasonic amplitude) on three-axis cutting forces, cutting temperature and surface quality are explored, and orthogonal experiments are conducted to determine the optimal parameter combination. Results reveal that increasing ultrasonic amplitude reduces cutting temperature by 31.8% and suppresses cutting forces effectively. Cutting depth and feed per tooth act as major influencing factors; the three-directional cutting forces drop by 31.1%, 56.7% and 22.9%, respectively. Surface roughness rises to 0.435 μm and 0.29 μm with growing feed per tooth and cutting depth, and decreases to 0.24 μm at higher cutting speeds. Under ultrasonic assistance, roughness increases slightly first and then declines remarkably. A threshold value exists for ultrasonic amplitude, and periodic tool–workpiece contact transforms strip textures into fish-scale morphologies. Proper parameter matching for ultrasonic milling lowers cutting forces and temperature, and improves surface quality of TC18 alloy. This study offers experimental data and theoretical references for relevant machining research.

Schlagwörter

Stichwörter der Autor:innen

TC18cutting forcecutting temperaturedry cuttingsurface roughnessultrasonic vibration-assisted milling

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China.
  • Shenyang Aircraft Corporation, Shenyang 110850, China.

Zitieren

APA

Xue, X., Shi, D., Liu, B., & Huang, R. (2026). Experimental Investigation on Cutting Characteristics and Surface Quality of TC18 Titanium Alloy in Longitudinal Ultrasonic-Vibration-Assisted Milling Under Dry Conditions. Micromachines, 17(7), 761. https://doi.org/10.3390/mi17070761

Vancouver

Xue X, Shi D, Liu B, Huang R. Experimental Investigation on Cutting Characteristics and Surface Quality of TC18 Titanium Alloy in Longitudinal Ultrasonic-Vibration-Assisted Milling Under Dry Conditions. Micromachines. 2026;17(7):761. doi:10.3390/mi17070761

BibTeX
@article{Xue2026,
  author = {Xue, Xiangyou and Shi, Dongyan and Liu, Biao and Huang, Renjie},
  title = {Experimental Investigation on Cutting Characteristics and Surface Quality of TC18 Titanium Alloy in Longitudinal Ultrasonic-Vibration-Assisted Milling Under Dry Conditions},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {7},
  pages = {761},
  doi = {10.3390/mi17070761}
}
Kostenlos starten →