Melting and sintering characteristics of carbon-free mold fluxes
Ironmaking & Steelmaking: Processes, Products and Applications · 10.04.2026
DOI: 10.1177/03019233261440748 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 10.04.2026. Verfasst von Guangda Bao und 6 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Gefördert von: Anhui Key Laboratory of Low Carbon Metallurgy and Solid Waste Resource Utilization.
Abstract (Originalsprache)
This study systematically investigates the effects of basicity (CaO/SiO 2 ) and key constituents on the melting behaviour and sintering characteristics of carbon-free mold fluxes. As the CaO/SiO 2 ratio increases, both the melting temperature and time of mold fluxes increase, while the sintering rate and volumetric shrinkage decrease. With increasing Al 2 O 3 content, the melting temperature and time first decrease and then increase with CaO/SiO 2 ratios below 1.0, and both parameters exhibit a continuous increase when the ratio is above 1.0. Moreover, the increase of Al 2 O 3 content leads to a reduced sintering rate and volumetric shrinkage. Higher F − , TiO 2 and MnO contents result in reduced melting behaviour, along with increased sintering characteristics. With increasing MgO and BaO content, the melting temperature and time first decrease and then increase, whereas the sintering rate and volumetric shrinkage show an opposite trend. XRD analysis indicates that carbon-free mold fluxes with lower sintering rates exhibit more complex phase compositions. The optimal compositional range for carbon-free mold fluxes is determined to be having CaO/SiO 2 ratio of 1.0–1.1, Al 2 O 3 content of 3–9 wt-%, F − content of 3–6 wt-%, and TiO 2 , MnO, MgO and BaO contents each at 6 wt-%, 6 wt-%, 3 wt-% and 3 wt-%, respectively.
Förderung
- Anhui Key Laboratory of Low Carbon Metallurgy and Solid Waste Resource Utilization
Zitieren
APA
Bao, G., Zhen, W., Zhuang, H., Lei, J., Wang, H., Wan, E., & Wu, T. (2026). Melting and sintering characteristics of carbon-free mold fluxes. Ironmaking & Steelmaking: Processes, Products and Applications. https://doi.org/10.1177/03019233261440748
Vancouver
Bao G, Zhen W, Zhuang H, Lei J, Wang H, Wan E, et al. Melting and sintering characteristics of carbon-free mold fluxes. Ironmaking & Steelmaking: Processes, Products and Applications. 2026. doi:10.1177/03019233261440748
BibTeX
@article{Bao2026,
author = {Bao, Guangda and Zhen, Wang and Zhuang, Haixiang and Lei, Jie and Wang, Haichuan and Wan, Entong and Wu, Ting},
title = {Melting and sintering characteristics of carbon-free mold fluxes},
journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
year = {2026},
doi = {10.1177/03019233261440748}
}
EUVIMED