EUVIMEDEUVIMED entdecken
Crossref

Aluminate-based mold fluxes with high crystallization and high lubrication characteristics

Jiang-hua Qi, Guang-da Bao, Chen Zhang, Hai-chuan Wang, Ting Wu

Metallurgical Research & Technology · 2026 · 123 (3) · 310

DOI: 10.1051/metal/2026002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 27.03.2026. Verfasst von Jiang-hua Qi und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: State Key Laboratory of Advanced Refractories, Wuhan University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To achieve coordinated control of lubrication and heat transfer in aluminate-based mold fluxes, the influence of typical components (Na 2 O, Li 2 O, BaO, and MgO) on the performance of mold fluxes was investigated. The experimental results reveal that with increasing contents of Li 2 O (0∼5 wt.%), BaO and Na 2 O (both 0∼10 wt.%), and MgO (2∼6 wt.%), the mold flux exhibits a monotonic decrease in hemispherical temperature, viscosity at 1300 °C, and breaking temperature, while a continuous increase in electrical conductivity at 1300 °C, which indicates enhanced lubrication capacity of mold fluxes. As for the apparent crystallization ratio of mold fluxes, it increases with Li 2 O addition and reaches 100% when Li 2 O exceeds 2 wt.%, while it gradually decreases with BaO addition. With increasing Na 2 O and MgO content, the apparent crystallization ratio first decreases and then increases, with inflection points at Na 2 O = 6 wt.% and MgO = 2 wt.%, respectively. Overall, as the content ranges of Li 2 O (0∼5 wt.%), Na 2 O (6∼10 wt.%), MgO (2∼6 wt.%), and BaO (0∼10 wt.%) increase, the breaking temperature of the mold fluxes decreases, enhancing lubrication ability, while the apparent crystallization ratio increases, boosting crystallization ability. These ranges represent the optimal composition for aluminate-based mold fluxes with high crystallization and high lubrication.

Förderung

  • State Key Laboratory of Advanced Refractories, Wuhan University of Science and Technology

Zitieren

APA

Qi, J., Bao, G., Zhang, C., Wang, H., & Wu, T. (2026). Aluminate-based mold fluxes with high crystallization and high lubrication characteristics. Metallurgical Research & Technology, 123(3), 310. https://doi.org/10.1051/metal/2026002

Vancouver

Qi J, Bao G, Zhang C, Wang H, Wu T. Aluminate-based mold fluxes with high crystallization and high lubrication characteristics. Metallurgical Research & Technology. 2026;123(3):310. doi:10.1051/metal/2026002

BibTeX
@article{Qi2026,
  author = {Qi, Jiang-hua and Bao, Guang-da and Zhang, Chen and Wang, Hai-chuan and Wu, Ting},
  title = {Aluminate-based mold fluxes with high crystallization and high lubrication characteristics},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {3},
  pages = {310},
  doi = {10.1051/metal/2026002}
}
Kostenlos starten →