EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Analysis of Fluorine-Free Mold Fluxes for Continuous Casting of Peritectic Steels

Márcia Maria da Silva Monteiro Pereira iD, Hervé Tavernier, Tiago Dos Santos Junior iD, Fernando Vernilli iD

Materials · 04.12.2024 · 17 (23) · 5947

DOI: 10.3390/ma17235947 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.12.2024. Verfasst von Márcia Maria da Silva Monteiro Pereira und 3 weiteren Autor:innen. Beteiligte Einrichtung: Worldwide Materials and Robotics Technologies Centre, Vesuvius Group SA, London EC4A 2AE, UK. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fluorine-based mold fluxes are critical for continuous casting of peritectic steels, controlling heat transfer and preventing cracks. However, environmental and health concerns associated with fluorine have spurred the search for alternative flux compositions. This study applied a factorial design to explore the effects of Na2O, TiO2, B2O3, and fluorine on key properties such as viscosity, crystallization temperature, and melting behavior. Analytical methods, including viscosity measurements, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM-EDS), combined with thermodynamic modeling, were used to evaluate performance. Four formulations were selected based on factorial design results. Sample A, with high Na2O, exhibited intense crystallization of merwinite (Ca3MgSi2O8) and perovskite (CaTiO3). Sample B, incorporating B2O3, had reduced crystallization and suitable viscosity (2.97 Pa·s). Sample C, with a slightly higher fluorine content than Sample B and without B2O3, presented balanced low viscosity (1.75 Pa·s) with a moderate crystallization tendency. Sample D, free of fluorine and B2O3, showed high viscosity (4.58 Pa·s) and significant crystallization. These results demonstrate that fluorine-free fluxes with properties comparable to fluorine-based compositions can be developed, offering a sustainable alternative for steelmaking. Industrial trials are necessary to validate their performance under operational conditions.

Schlagwörter

Stichwörter der Autor:innen

crystallizationmold fluxesperitectic steelviscosity

Autor:innen und Institutionen

  • Worldwide Materials and Robotics Technologies Centre, Vesuvius Group SA, London EC4A 2AE, UK.
  • Lorena School of Engineering, University of São Paulo, São Paulo 05508-220, Brazil.

ORCID-Profile: Márcia Maria da Silva Monteiro Pereira, Tiago Dos Santos Junior, Fernando Vernilli

Zitieren

APA

Pereira, M. M. D. S. M., Tavernier, H., Dos Santos Junior, T., & Vernilli, F. (2024). Design and Analysis of Fluorine-Free Mold Fluxes for Continuous Casting of Peritectic Steels. Materials, 17(23), 5947. https://doi.org/10.3390/ma17235947

Vancouver

Pereira MMDSM, Tavernier H, Dos Santos Junior T, Vernilli F. Design and Analysis of Fluorine-Free Mold Fluxes for Continuous Casting of Peritectic Steels. Materials. 2024;17(23):5947. doi:10.3390/ma17235947

BibTeX
@article{Pereira2024,
  author = {Pereira, Márcia Maria da Silva Monteiro and Tavernier, Hervé and Dos Santos Junior, Tiago and Vernilli, Fernando},
  title = {Design and Analysis of Fluorine-Free Mold Fluxes for Continuous Casting of Peritectic Steels},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {5947},
  doi = {10.3390/ma17235947}
}
Kostenlos starten →