EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Evaluation of Shear Bond Strength of Orthodontic Adhesives Containing Zinc Oxide Nanoparticles: An In Vitro Study

Radhika Khandelwal, Sagar Mapare, Arjun Karra, Ram Mundada, Kapil Fafat, Vijay Yannawar, Kanchan Wadekar

Journal of Indian Orthodontic Society · 2026-07 · 60 (3) · 213-219

DOI: 10.1177/03015742261445678 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Indian Orthodontic Society, online erschienen am 09.05.2026. Verfasst von Radhika Khandelwal und 6 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Orthodontic bonding materials are required to provide adequate adhesion throughout treatment while also permitting safe debonding upon completion. Recently, the incorporation of nanoparticles into composite resins has gained attention due to their antimicrobial properties and their potential to reduce enamel decalcification around orthodontic brackets. However, such modifications may influence the mechanical and physical characteristics of adhesives, particularly the shear bond strength. Limited evidence is available regarding the effect of zinc oxide nanoparticles on the bond strength of orthodontic brackets.

Aim

This study aimed to evaluate and compare the shear bond strength of orthodontic brackets bonded using an adhesive containing zinc oxide nanoparticles with that of a conventional orthodontic adhesive. Materials and Methods A total of 32 extracted human premolars with intact structure were selected for this in vitro investigation and randomly assigned into two equal groups ( n = 16). Stainless steel brackets (McLaughlin–Bennett–Trevisi (MBT) 0.022″ × 0.028″) were bonded to the buccal surfaces using two different adhesive systems: one incorporated with 1% zinc oxide nanoparticles and the other without nanoparticle addition, serving as the control. After 24 h, shear bond strength was measured using a universal testing machine (UTM). The collected data were statistically analyzed using IBM Statistical Package for Social Sciences version 24, and an independent t -test was applied to determine the significance of differences between groups.

Results

A statistically significant difference in shear bond strength was observed between the two groups. The experimental group demonstrated a mean value of 2.8 MPa, whereas the control group showed a considerably higher mean value of 16.28 MPa.

Conclusion

The addition of zinc oxide nanoparticles to orthodontic adhesives has a significant impact on shear bond strength, which may restrict its effectiveness for clinical use.

Zitieren

APA

Khandelwal, R., Mapare, S., Karra, A., Mundada, R., Fafat, K., Yannawar, V., & Wadekar, K. (2026). Evaluation of Shear Bond Strength of Orthodontic Adhesives Containing Zinc Oxide Nanoparticles: An In Vitro Study. Journal of Indian Orthodontic Society, 60(3), 213-219. https://doi.org/10.1177/03015742261445678

Vancouver

Khandelwal R, Mapare S, Karra A, Mundada R, Fafat K, Yannawar V, et al. Evaluation of Shear Bond Strength of Orthodontic Adhesives Containing Zinc Oxide Nanoparticles: An In Vitro Study. Journal of Indian Orthodontic Society. 2026;60(3):213-219. doi:10.1177/03015742261445678

BibTeX
@article{Khandelwal2026,
  author = {Khandelwal, Radhika and Mapare, Sagar and Karra, Arjun and Mundada, Ram and Fafat, Kapil and Yannawar, Vijay and Wadekar, Kanchan},
  title = {Evaluation of Shear Bond Strength of Orthodontic Adhesives Containing Zinc Oxide Nanoparticles: An In Vitro Study},
  journal = {Journal of Indian Orthodontic Society},
  year = {2026},
  volume = {60},
  number = {3},
  pages = {213--219},
  doi = {10.1177/03015742261445678}
}
Kostenlos starten →