Does simplification signify compromise? Evaluation of different universal adhesives on shear bond strength: in vitro study
Frontiers in Bioengineering and Biotechnology · 10.04.2026 · 14
DOI: 10.3389/fbioe.2026.1803547 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 10.04.2026. Verfasst von Jiyuan Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: School and Hospital of Stomatology, China Medical University, Shenyang, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Introduction
Universal adhesives are widely used in the field of dental prosthetics owing to their broad applicability and clinical convenience. This study aims to evaluate the bonding performance of four adhesives on zirconia and resin material surfaces.
Methods
The shear bond strength (SBS) test results of four adhesives including Single Bond Universal Adhesive (3M1), Scotchbond™ Universal Plus Adhesive (3M2), PALFIQUE UNIVERSAL BOND (TK1) and BONDMER Lightless II (TK2) were studied (n = 10 per adhesive per storage condition) under three storage conditions: constant-temperature water storage at 37 °C for 24 h, 5,000 thermal cycles, and 10,000 thermal cycles. Three-way ANOVA, Tukey HSD test, and Games-Howell test were performed on the outcome data (α = 0.05). The Adhesive Remnant Index was used to evaluate the debonding condition between resin and zirconia surfaces.
Results
All four groups exhibited acceptable bond strength measured at 24 h in a 37 °C constant-temperature water bath and significant differences were observed among the four groups ( p < 0.05). After thermal cycling, the bond strength of all groups showed significant decline, with only TK1 yielding detectable data. Three-way ANOVA results indicated that all factors—storage conditions ( p < 0.001), brands ( p < 0.05), and generations ( p < 0.05)—exerted significant effects on SBS. At the same time, significant differences were observed between the interaction among the three factors ( p < 0.001).
Conclusion
The bonding performance of universal adhesives of different generations and brands is material-dependent. After 5,000 thermal cycles, the SBS differed significantly among brands and generations of adhesives, with TK1 exhibiting better performance in this study. Technological advances have introduced user-friendly products with simplified application procedures. However, clinicians should adopt an evidence-based perspective and focus on clinical effect and experimental data of materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School and Hospital of Stomatology, China Medical University, Shenyang, China.
- Department of Restorative Dentistry, Division of Oral Health Science, Faculty of Dental Medicine, Hokkaido University, Sapporo, Japan.
- Department Emergency and Oral Medicine, Liaoning Provincial Key Laboratory of Oral Diseases, School and Hospital of Stomatology, China Medical University, Shenyang, China.
- Department of Prosthodontics, School and Hospital of Stomatology, China Medical University, Shenyang, China.
Zitieren
APA
Chen, J., Xiao, Y., Wei, Y., Li, X., Sano, H., Kang, Y., & Fu, J. (2026). Does simplification signify compromise? Evaluation of different universal adhesives on shear bond strength: in vitro study. Frontiers in Bioengineering and Biotechnology, 14. https://doi.org/10.3389/fbioe.2026.1803547
Vancouver
Chen J, Xiao Y, Wei Y, Li X, Sano H, Kang Y, et al. Does simplification signify compromise? Evaluation of different universal adhesives on shear bond strength: in vitro study. Frontiers in Bioengineering and Biotechnology. 2026;14. doi:10.3389/fbioe.2026.1803547
BibTeX
@article{Chen2026,
author = {Chen, Jiyuan and Xiao, Yuxin and Wei, Yihang and Li, Xinqi and Sano, Hidehiko and Kang, Yuanyuan and Fu, Jiale},
title = {Does simplification signify compromise? Evaluation of different universal adhesives on shear bond strength: in vitro study},
journal = {Frontiers in Bioengineering and Biotechnology},
year = {2026},
volume = {14},
doi = {10.3389/fbioe.2026.1803547}
}
EUVIMED